3rdgenAdam
Junior Member
- Joined
- Aug 14, 2023
- Posts
- 5
- Reaction score
- 1
- Location
- Corsicana Texas
- Ram Year
- 2003
- Engine
- 5.9L Magnum
2003 Ram 1500 4x4 5.9L magnum
Truck starts right up idles great and smoothly, stalls 30 seconds 1 min a few mins after started. It will restart again right away but continues to stall, just dies, doesn’t chug or anything along those lines. Codes I’m getting….. p0031, p0037, p1495, p1765. I know the first 2 are O2 senor codes and have been there sense I bought the truck 4 years ago and never had a issue. Cat was deleted at some point as well before I bought it.
This is the list of everything that I have replaced so far. Plugs, wires, cap, rotor, distributor pickup sensor, iac, cleaned throttle body, coil pack, evap purge valve, evap pump, removed and cleaned all evap lines and inspected and reinstalled.
I can rev up to 1,500rpm 2,000rpm and hold it and it still stalls out.
I’m at a loss as to what I can do next. Please help!
Pic is for attention and a work in progress.
Truck starts right up idles great and smoothly, stalls 30 seconds 1 min a few mins after started. It will restart again right away but continues to stall, just dies, doesn’t chug or anything along those lines. Codes I’m getting….. p0031, p0037, p1495, p1765. I know the first 2 are O2 senor codes and have been there sense I bought the truck 4 years ago and never had a issue. Cat was deleted at some point as well before I bought it.
This is the list of everything that I have replaced so far. Plugs, wires, cap, rotor, distributor pickup sensor, iac, cleaned throttle body, coil pack, evap purge valve, evap pump, removed and cleaned all evap lines and inspected and reinstalled.
I can rev up to 1,500rpm 2,000rpm and hold it and it still stalls out.
I’m at a loss as to what I can do next. Please help!
Pic is for attention and a work in progress.