Taillight wiring on 05

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Detroitfd

Junior Member
Joined
Oct 28, 2013
Posts
24
Reaction score
0
Ram Year
2005
Engine
Cummins 5.9 diesel
Hey guys

I am going to put led bulbs in my reverse lights. I need to know what wires the power and ground to that harness. I ave to put a resistor in, and it says to wire to the pos and grd for the light.

I found the power, seems to be a white wire w bright green stripe. Not sure which is the ground tho. I'm sort of assuming its the black wire, but not sure.

Any help is appreciated!
 
OP
OP
Detroitfd

Detroitfd

Junior Member
Joined
Oct 28, 2013
Posts
24
Reaction score
0
Ram Year
2005
Engine
Cummins 5.9 diesel
Just as an FYI, you don't need resistors for the reverse lights. I put both lights in while waiting for a reply here, and I don't get a 'bulb out' light when in reverse or at all. So instead of deleting the to figured this May help someone in the future. :)
 
Top