Wide wheel problems

[Dryates]

Sorry if this has been answered. Anyone with 10 or 12 wide wheels have any short or long term suspension problems running wider negative offset wheels. I know the ball joints can be a problem, but better UCA should fix this. Just wondering what to look forward to by going wider and negative. Also how much of a problem difference would there be in a 20x10 -24 vs 20x12 -44 with the same tires 33x12.5r20

 

[Robocop_9]

Sorry if this has been answered. Anyone with 10 or 12 wide wheels have any short or long term suspension problems running wider negative offset wheels. I know the ball joints can be a problem, but better UCA should fix this. Just wondering what to look forward to by going wider and negative. Also how much of a problem difference would there be in a 20x10 -24 vs 20x12 -44 with the same tires 33x12.5r20

I'm running 33x12.50 on 20s with -24 offset. I'm running a level. I replaced my UCA with mevotech because of the ball joint issues. The -24 offset will set out pretty wide. I suggest flares


Sent from my iPhone using Tapatalk

 

[Witch]

I just put on Zone UCA's in anticipation of -12 offset wheels and the 2" spacers I have coming

Running 37x12.5 r20's

 

[BiGMERF]

****, now i need UCA's
?

 

[Rzrman328]

Anyone with 10 or 12 wide wheels have any short or long term suspension problems running wider negative offset wheels.

Zero issues.

 

[Dryates]

What size you running?

 

[14blackouthemi]

I have 22x12 -44 offset on stock suspension zero issues


Sent from my iPhone using Tapatalk

 

[VB712]

20x12 -44 offset here without any issues. Only been about 500 miles though.

 

[Robocop_9]

****, now i need UCA's
?

Depends. You running a leveling kit?


Sent from my iPhone using Tapatalk

 

[BiGMERF]

Depends. You running a leveling kit?


Sent from my iPhone using Tapatalk

yup and kept it at 2.1 partly cause i like a lil rake and partly to avoid uca issuees

 

[Robocop_9]

yup and kept it at 2.1 partly cause i like a lil rake and partly to avoid uca issuees

From what I've seen if you run bilsteins you won't have the issues. A lot of guys here with bils at 2.1 and no issues. I'm running a 3" spacer and it pushed my ball joints up after 3-4K miles. I went ahead and swapped my UCAs for mevotech


Sent from my iPhone using Tapatalk

 

[Rzrman328]

What size you running?

20x12 -44

 

[Mr.AK902]

Sorry if this has been answered. Anyone with 10 or 12 wide wheels have any short or long term suspension problems running wider negative offset wheels. I know the ball joints can be a problem, but better UCA should fix this. Just wondering what to look forward to by going wider and negative. Also how much of a problem difference would there be in a 20x10 -24 vs 20x12 -44 with the same tires 33x12.5r20

Difference between -24 and -44 offsets is 20MM negative in the difference. In other words, the hub mounts to the rim surface 20MM closer to the vehicl with a -44 offset then that rim of a -24 offset. This pushes the rim out 20MM further, or in other words the better part of an inch.

I've had both offsets in the past. -44 pushes the wheel out 3+ inches or more. Personaly i think -24 looks the best, especially on a stock height truck. My next set of rims will be -24 at stock height suspension