Lifted 4th Gen Pics - Show Em Off!

[GratefulNC]

2016 RAM Blacked Out Express with RC 6" lift on Nitto Ridge Grappler MT-AT Hybrids 37x12.50 r20

 

[Bakeshow]

6” RC on 20” fuels with Amp 33’s

 

[EMPY]

2011 Mega DSL w/6" Superlift, 37" MT Deegans & 20" XD Addicts, EGR/DPF Delete, 5" Straight Pipe, S&B intake, RaceMe Jr Tuner

 

[4eyedconekiller]

Pics of both of my company trucks. First is a 2019 DS with 4" Ready kit with 18" Mickey Thompson's and AMP 325/65. Second is a 2019 DS with 2" Body Armor level and AMP 305/55 on factory 20" wheels.

View attachment 170092

View attachment 170093

What bed on the first truck? I’m looking for wheel to wheel bars for my short bed truck.

 

[Vid S]

What bed on the first truck? I’m looking for wheel to wheel bars for my short bed truck.

The bed size is 6'4". Side steps are Westin HDX.

 

[Kbayjoe]

2013 4x4 tradesman 6in rough country lift on 37 cooper discovery STT pros

 

[Petebeard]

There are a lot of awesome rigs on this thread.

I can finally post here.

Full Eibach pro truck kit. Front at lowest setting 2.75" and rear 1" coil.

 

[Joes1500]

There are a lot of awesome rigs on this thread.

I can finally post here.

Full Eibach pro truck kit. Front at lowest setting 2.75" and rear 1" coil.

View attachment 172855

How is the ride compared to stock ?.

Looks good by the way.

 

[Petebeard]

Thanks!

I can't give a valid comparison.

When it got pulled apart there was a Daystar spacer kit f&r that I didn't know was there as it only sat an inch or so taller than most others.

Compared to that it feels great. I'm liking it. It feels firmer but more sprung now, if that makes sense.

Its sitting about a inch higher on all four corners over what it was. Now I'm at F 39" R 40.5", so it's a good start.

 

[fastbike02]

Maxtrac 4.5

View attachment 169636
View attachment 169637

2/4wd? what type and size of wheels are you running? love how your's look

 

[tnctx02]

2015 4.5” Rough Country

View attachment 166642

View attachment 166643

Looks good. What brand fender flares did you go with?

 

[tnctx02]

2017 Big Horn
BDS 6"
KO2 35s

View attachment 164532

What are the decals at the end of the bed?

 

[drprymer]

2/4wd? what type and size of wheels are you running? love how your's look

2wd , Stock 20s with 275/65r20 Nittos

 

[hhhjohn]

2016 Ram 1500

 

[tnctx02]

Debadged, New Rebel style grill, and new RAM logo on grill guard because I couldn't see it on the grill with the grill guard on. Raptor coated the grill, RAM logo, and the nerf steps

 

[tnctx02]

The day I bought my 2017 RAM



And today

 

[joeygster]

The day I bought my 2017 RAM

View attachment 173516

And today

View attachment 173518

Wow! Awesome transformation.

 

[Chris DeCuir]

@Chris DeCuir what's your ride quality like with those struts set at 2.8? I'm assuming you are not using the Zone preload spacer that came with the kit? Also, how are your CV and upper control arm angles?

Truck looks really nice BTW, I love the stance it has.

That is correct I am not using the Zone preload spacer and as it sits it is .5" lower in the front. THe ride quality is awesome set at 2.8 as I have the upgraded Fox shocks in the rear as well. The CV angles and arm angles are fairly straight. I will see if I can get some pics to post.

 

[tnctx02]

Wow! Awesome transformation.

What brand fender flares did you buy> The fit looks real good and they look really good on your truck.
I am looking for some now, but over $400 for Bushwhackers will make me wait to save up.

 

[joeygster]

What brand fender flares did you buy> The fit looks real good and they look really good on your truck.
I am looking for some now, but over $400 for Bushwhackers will make me wait to save up.

Mine are the Bushwackers.