DoughRat19
Senior Member 41 From Massachusetts
- Joined
- Last seen
- Viewing thread How To: Add Factory Keyless Enter N Go
- Posts
- 243
- Reaction score
- 120
Latest activity Postings About
-
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.So was the hub you replaced for an auto or manual? This is a little outside my expertise but I would think that if it was working... -
DoughRat19 reacted to Jimmy07's post in the thread How To: Add Factory Keyless Enter N Go with
Like.
Hang on…I think it’s time to elaborate on exactly what you have going, and what brought you to thinking you need a manual transmission... -
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.I looked up that part number and it’s definitely for a manual. what year is your Ram? 2500? I would double check the pins on the two...
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Just to confirm, when you say new module/relearn, you mean the reset/replace function? And the new hub you for it for a manual trans truck?
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.I just spliced the front handle wiring and ran it to the back doors. You have to modify a door handle for the back drivers side door...
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Should have asked you this the other day. Are you trying to remote start from inside the truck? You have to be outside. Make sure...
-
Well that sure helped!! THANK YOU
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.If you’re referring to the pink connector that is for an external antenna. If you purchased a newer push button hub (2017+, maybe 2016...
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Really the only difference between the hubs as far as I can tell is auto or manual transmission and possibly air ride.
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Yeah I should have mentioned, I don’t believe you can have remote start with the manual hubs.
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Try 68234885AB, it’s for 2015 2500-5500’s with manual trans and passive entry/push start. Should also work for your 2014.
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Can you list what settings you updated in the BCM?
-
DoughRat19 replied to the thread How To: Add Factory Keyless Enter N Go.Resetting the rf hub shouldn’t effect any of the settings that you changed in the BCM. They are two different modules.
-
Been busy but just wanted to post my setup I finished a few weeks back only took me 2 days to get it done s/o to @DoughRat19 Very...
-
DoughRat19 replied to the thread Additional UAQ/UAS Update Files 28.3/30.24/34.2.@Lurker55, huge shout out for helping me with my UAS! I just ran the update to get to v39.6 and it fixed the issue I was hoping it would...
-
-
-
Loading…
-
Loading…
Members online
- Dinky
- Ram Flores
- joeygster
- Kurt B
- pyrogen007
- gt8684
- Trick
- Evo1xvg
- jonnylyt
- achubbard
- 89ED89
- skuppy069
- bepeng
- mike19950
- powerstrokeaaron
- Old Cop 66
- sbenjamin
- turkeybird56
- bulldogbreed
- runamuck
- icetraxx
- FL-RAM
- Martins hemi
- Rlaf75
- ExplorerFrog
- CanRebel
- NJMOPAR
- Pnied919
- yogibear18
- HemiLonestar
- grev
- NHTM4R3
- OC455
- tjfdesmo
- thad8403
- smoothee
- thkbaron
- Ducati47
- Nello
- Daniel Ortiz
- Brandon09
- Mchurch52
- metalchewy
- backfist
- KansasArt
- rick1201
- DKONG
- Truck Fun
- oe542bob
- Joe _S2013