This has been covered pretty well. The big tires and the gears will definitely work your engine and transmission harder which makes more heat. Driving in 4th or 5th and reducing speed will help that once you get going. However getting started and or some stop and go traffic will heat things...
These guys do good work & most likely could fix the wheel.
https://www.wheelmanspokane.com/
The only problem is your other wheels might look shabby when compared to the restored one.
Austen:
"What fixed my parking light out issue was enabling the two settings below.
CBC Features-LED Front Turn Lamps Present
AND
CBC Features-LED Front Park/Marker Lamps Present"
FWIW my parking light / side marker are set that way - but still get the parking light out fault code. A...
Just some food for thought for those of you with a better understanding & knowledge of the Ram electronics.
This is close to something that has puzzled me. The conversion harness (stock projector to quad harness) that came with my Gen 2 AlphaRex headlights splices the fault sensor wire to the...
I'm attempting to get a set of AlfaRex headlights to work & my issues & symptoms are the same as Mechatricity's.
What resistors did you use - do you have a link?
Thanks
One of the easiest significant upgrade to lights with the 9005 bulb is modifying the HIR1 bulb. It made a significant improvement in my 2017 Ram's headlights (factory projectors) with no relays, resistors, error canceling etc or other wiring. For directions on the modification follow this link...
I haven't got the B177 since I used AlfaOBD to disable the "Door Ajar Switch Usage".
I Assume you are talking about LED headlight bulbs. If they were 180 off would the bulbs even light?
FWIW my low beam are HIDs with relays & high beams are LED. I followed the positive leads from the AlphaRex...
I don't believe that is my current problem
Earlier I had B177B and B177A which I believe are related to the right & left front turn lamps - hyper flash etc.
Earlier I changed to the following:
CBC I/O Usage: Front Driver Door Ajar Switch Usage- Disable
CBC I/O Usage: Front Passenger Door...
I recently installed the AlphaRex Pro Series Gen 2 headlights in my 2017 Ram 3500 Laramie DRW 4x4 that came with factory projectors. Thanks to this forum, and AlfaOBD I was able to solve most of the error codes. However AlfaOBD is still reporting errors B16BF (left front side marker control...
My 2017 has factory projectors however they have halogen bulbs. I believe LEDs weren't available until 2019. The main reasons most aftermarket headlights are set up for the Quad/Dual reflector headlights is more Rams came from the factory with them - it's a bigger market. Have you looked at...
Follow this link to Amazon. https://www.amazon.com/gp/product/B07X2TZFV5/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Note the drop down box to choose stock projector or quads and also chrome / black etc.
I put a flatbed on my 2017 Ram 3500 that originally had LED tail lights. The LEDs the upfitter put on the bed gave me a bulb out quick flash. It turns out the factory LEDs had a extra wire in addition to the positive and negative that the aftermarket LEDs had. See the attached pdf - I used...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.