-
-
BenchTest replied to the thread My experiences thus far with 3.6 Pentastar Ram 1500.I've looked at that Sonnax kit. How was the install? Fairly straight forward? -
BenchTest replied to the thread 2025 Pentastar coolant temperature.Have a thermal/temp gun? You could check temps at the inlet and discharge of the radiator. Something is definitely not right.
-
BenchTest replied to the thread My experiences thus far with 3.6 Pentastar Ram 1500.What was the purpose of the tear-down? Just inspecting?
-
BenchTest replied to the thread My experiences thus far with 3.6 Pentastar Ram 1500.I believe manufacturer's (ZF) current spec is 90K for initial service, normal driving or in the 50-75K mile range for "severe duty"...
-
BenchTest replied to the thread Well this is one of the lower milege cam failures.Somebody posted 14 million as the current #, I believe.
-
BenchTest replied to the thread Well this is one of the lower milege cam failures.Well, if you've paid attention to any of my posts, you'll know that my information isn't from "just a few people on a forum." As I've...
-
BenchTest reacted to EdGs's post in the thread Well this is one of the lower milege cam failures with
Like.
Seeing alot of posts from those who have had lifter/cam failure, makes me wonder if the heatreating of the cams/lifter rollers was up to... -
BenchTest replied to the thread Well this is one of the lower milege cam failures.I don't have the data in front of me to expand on this with any level of integrity as I no longer work at the company (haven't for a...
-
That sounds like a fair assessment. I’ll go through and see what I can find out. I’m sure I’ll need to replace all the rubber parts, but...
-
BenchTest replied to the thread Suspension bushings.Hard to put a "worth" on it. If it's your primary vehicle and you want to get some more miles out of it in lieu of buying a new(er)...
-
BenchTest replied to the thread Well this is one of the lower milege cam failures.<null>
-
BenchTest replied to the thread Suspension bushings.Some people enjoy suspension work, others dread it. If you find that all of your control arm bushings need replaced, you might look...
-
BenchTest replied to the thread Well this is one of the lower milege cam failures.<null>
-
-
Loading…
-
Loading…
Members online
- 97RedRam
- 907ak
- Tumbleweed62
- BaseLayer
- PowrRam
- smoothee
- diymirage
- amurp15
- cmlangley20
- Wild one
- DzRide
- demonram
- ts27330
- mrack
- Buddhaman
- bm02tj
- akwoolf
- Dwell19
- mr300z87
- rzr6-4
- ARAM2021
- black89
- PeteA
- John Schmidt
- BDay2351
- edsamue57
- Ron327
- JW2 Innovations
- lezmark7
- jawzs2
- huntergreen
- Barr2255
- Majereenes
- etennram
- RamCares
- DILLIGAF
- GeauxApe12B
- Terryala
- Ludville1
- ncbeachbum
- Matt5462
- hubbard
- Yardbird
- BobinIdaho
- Omni1990
- A child of God
- bloup
- Atcer2018
- Ol3Toes
- jws123