A
Reaction score
19

Latest activity Postings About

    • A
      AStanE replied to the thread Tipm relays.
      I have also worked on 480v 3-phase power, not that 3-phase should really make it anymore impressive. ;)
    • A
      AStanE replied to the thread Tipm relays.
      I'll take a picture. I really don't. I checked every relay when trying to troubleshoot an issue and none of them are for fuel pump. I...
    • A
      AStanE replied to the thread Tipm relays.
      Which is why I used an inline fuse ;)
    • A
      AStanE reacted to 1 MEAN66's post in the thread 2014 5.7 misfire, now won't start. with Like Like.
      Glad to see that is was found!
    • A
      How in the H3ll did I accumulate that much water? I'm coming up with nothing for the most part. I did find an emissions hose off the...
      • hose.jpg
    • A
      AStanE replied to the thread 2011 1500 No crank/no start.
      Clicking like you heard the relays engage each time when someone cycled the key, or chattering relays like they weren't staying pulled...
    • A
      AStanE replied to the thread Tipm relays.
      Never runs at all? Like not even for a few pressure up seconds?
    • A
      AStanE replied to the thread Tipm relays.
      I had it in my mind just using the battery terminal and applying voltage to the load slot where the fuse goes towards solenoid. My 2014...
    • A
      AStanE replied to the thread Tipm relays.
      Isn't there another relay that switches/sends power to it to use? Like when the key is on it powers up certain banks of power pins.
    • A
      AStanE replied to the thread Synthetic Oil.
      I did read it, pretty vague. I would rather avoid any future breakdowns, even if they can cover it. It's a pretty simple warranty for...
    • A
      AStanE replied to the thread Synthetic Oil.
      Hypothetical here. IF you were bringing your truck to a dealership for oil changes, that are mandatory to be performed by them, in...
    • A
      Shop got it running.. Fuel had a lot of water in it........sample they pulled was close to 50% water.. I should've checked a sample, but...
    • A
      i've stated this before in some other threads similar to this one. You state that it ran smooth briefly with starting fluid yet the...
    • A
      The relay is soldered onto the TIPM board on these. I have no serviceable relay to pull. Luckily, the fuse for the pump is post-relay so...
    • A
      Appreciate all the responses thus far. I really do. Just looking to arm up before I venture out to the front
  • Loading…
  • Loading…
Top