B

Bam930878

Member From Illinois
Joined
Last seen
Posts
32
Reaction score
6

Latest activity Postings About

    • B
      Bam930878 replied to the thread Pillar post vinyl.
      When i used the heat gun i didnt get anything hot more of a warm just enough to slightly soften adhesive
    • B
      Bam930878 replied to the thread I love this forum… but.
      As for the best brake pads i dont have a answer because i dont know i just use what i use autozone used to have lifetime pads so you use...
    • B
      Bam930878 replied to the thread Pillar post vinyl.
      Heat gun a ton of patience and goo gone its not easy to remove but can be done take your time het you a plastic scraper tool or even a card
    • B
      Bam930878 replied to the thread Coolant running cooler since air box removal.
      I personally didn't like the factory 203 thermostat doesnt leave much room if you get into a overheating situation ive heard ram did...
    • B
      Bam930878 replied to the thread Coolant temp fluctuations.
      Check of you have active grill shutters and do you recall what temp the fan was reprogramed to
    • B
      Bam930878 replied to the thread Coolant temp fluctuations.
      So you did a e fan swap and 180 thermostat did you have it tuned to have the fan come on at lower temp as well and how does your heat...
    • B
      Bam930878 replied to the thread Coolant running cooler since air box removal.
      Someone correct me if im wrong but the 3rd gen had a 192 thermostat 4th and current have a 203 thermostat so your temp is normal
    • B
      Bam930878 replied to the thread Electric fan on 5.2 Magnum?.
      I had a jeep grand cherokee 5.2 a while back i swapped a e fan out of a newer jeep liberty it worked great possible idea for you
    • B
      Bam930878 replied to the thread Electric fan.
      With the stock setup the secondary electric fan will only come on with the ac on or if mechanical fan isn't providing sufficient cooling...
    • B
      Bam930878 replied to the thread ECTs and Cooling Mods.
      As for the temp spike after modification i have no clue but you shouldnt have need to extend the harness there is videos and write ups...
    • B
      Bam930878 posted the thread Chrome bumpers in Exterior.
      I would like to get rid of the chrome on my door handles and front and rear bumpers anyone have any suggestions ie paint plasti dip easy...
    • B
      Bam930878 replied to the thread Detailing: How to Debadge/Favorite Method.
      Nice warm day fishing line wrapped around two pointer fingers to cut the adhesive goo gone to clean off the excess
      • IMG_2803.jpeg
    • B
      Bam930878 posted the thread Sonnax 65rfe line booster Rfe-Lb1 in General Discussions.
      Does anyone have any experience with the sonnax line pressure booster for the 65rfe sonnax RFE-LB1 good or bad or what exactly its...
    • B
      Bam930878 replied to the thread 65rfe.
      Anybody have any experience with it to give feedback on the product what it does or claim to do
    • B
      Bam930878 posted the thread 65rfe in Engine & Performance.
      2013 ram 1500 5.7 65rfe looking at modification to improve drivability came across a product by somnax the line pressure booster kit...
    Show older items
  • Loading…
  • Loading…

Latest posts

Staff online

Members online

Total: 1,191 (members: 42, guests: 1,149)
Robots: 1,001

Forum statistics

Threads
198,536
Posts
2,907,665
Members
161,171
Latest member
cowboyknight17

Share this page

Top