Cool_Hand_Luke's latest activity
-
Cool_Hand_Luke reacted to Mpgrimm2's post in the thread HVAC problem with UAS upgrade in '18 truck with
Like.
Adam P. ? ... Your submission ended up in junk mail... Catching up on emails... will reply later this evening. -
Cool_Hand_Luke replied to the thread HVAC problem with UAS upgrade in '18 truck.Did you find the solution? I have same but inverted issue. My truck is all metric, but when I swapped my radio, the temp was in Fahrenheit.
-
Cool_Hand_Luke reacted to Ryanh19's post in the thread HVAC problem with UAS upgrade in '18 truck with Like.
I’m working on getting a new HVAC module (68366553AA) for my 2013 1500. I’ll report back with results.
-
Cool_Hand_Luke replied to the thread HVAC problem with UAS upgrade in '18 truck.Keep us posted. I’m curious to find out.
-
Cool_Hand_Luke reacted to Keith1316's post in the thread HVAC problem with UAS upgrade in '18 truck with Like.
Hi! I’m having the same issue after upgrading to the 8.4 UAQ Radio. I’m going to try changing the module like you did and see if it...
-
Cool_Hand_Luke replied to the thread HVAC problem with UAS upgrade in '18 truck.Hi guys, I read all 19 pages of this thread. My issue started when I wanted to get CarPlay. My truck is 2013 RAM 1500 Big Horn with...
-
-
Cool_Hand_Luke reacted to chri5k's post in the thread HVAC problem with UAS upgrade in '18 truck with Like.
Would be nice if Infotaiment had a clue and didn't have to rely on the members of this forum to support their paying customers. They...
-
Cool_Hand_Luke reacted to SitKneelBend's post in the thread HVAC problem with UAS upgrade in '18 truck with Like.
Don't worry, after you get AlfaOBD you'll wonder why you didn't get it sooner. Sent from my HTC U11 using Tapatalk
-
Cool_Hand_Luke replied to the thread radio swap.What radio is currently in your truck and what are you swapping ?
-
Cool_Hand_Luke replied to the thread 8.4 radio programming.Hi, I know this is old post but have you solved your problem? I also have 2013 1500 Big Horn with single zone manual controls and...
-
Cool_Hand_Luke replied to the thread 8.4 Uconnect over the air update failure.Could you help me updating my 2018 VP4R radio to the latest firmware? It is a donor radio and i dont have a Vin#. Any help would be...
-
Cool_Hand_Luke replied to the thread Need Help with Uconnect 8.4 Update.Having same issue with NAV. I swapped 2018 radio into my 2013. Right away NAV was frozen and not updating my current position. Were you...
-
Cool_Hand_Luke replied to the thread Uconnect 8.4 w/NAV to Uconnect 8.4 UAQ w/NAV - CarPlay.Congratulations on getting CarPlay on your RAM. I'm in the same predicament. I have 2013 RAM 1500 and just installed radio VP4R off of...
-
Cool_Hand_Luke reacted to PA Ram's post in the thread Additional UAQ/UAS Update Files 28.3/30.24/34.2 with Like.
Finally got updated from factory 2018 UAQ to 40.1, went to 28.3 first and then 40.1 and used map file from one of the other files hosted...
-
Cool_Hand_Luke reacted to PA Ram's post in the thread Additional UAQ/UAS Update Files 28.3/30.24/34.2 with Like.
Here's a link to my google drive if you want to grab it. Not sure which version you are running, but if below 22.64 I believe, then you...
Members online
- hwood
- smoothee
- Jbg3
- Dutra
- HydroTopzz
- Atcer2018
- Fritter
- JohnCA
- Musky Mike
- RebelShortbed
- KalboKalbs
- TC
- Afranky80
- ecsaltz
- zstroken
- AZ MARK
- braak
- Taspeace
- tsherv
- cityredneck
- delanedr
- Dinky
- Jeepwalker
- andres124501
- abates362
- GTyankee
- Docwagon1776
- Calexv
- Choicebro
- BDay2351
- raggdoll
- gnusmas1
- LogHauler
- san1sjd
- G-Ride990
- crackerjack1957
- mb33458
- Avurado
- mikeru
- Curmudgeon
- Don138ram
- sigfla
- 6speed4.7
- RamInnIt
- diymirage