No, you need the tuner with delete codes or else the truck will go into limp mode. You can always run a filter back but there is very little noise difference
Ready to install some subs in the truck. Planning on setting these behind the back seats in the megacab space. Is this a good deal? Opinions or experiences with theses subs or amp? Don't want anything crazy, just something with a nice punch. Also, how much will I spend for all the wiring??
I have a 2008 Ram Laramie Megacab and am having problems with the heater. The truck only blows luke-warm air at full operating temp. I topped off the coolant on the truck with no results. The 2 passenger vents blow noticeably colder air (when at full heat) than the 2 driver side. Any ideas?
the running lights both front and rear are not working on my driver side. when I hit lock/unlock the lights come on, but when I flip the switch in the cab to the running lights, only the passenger side comes on. I did some work to my batteries recently. I noticed a spark when putting a terminal...
I have a 10" lift on my truck. I bought the truck with the lift. After buying the truck I removed all of the lift to have everything painted. When I put everything back together I didn't like the way the truck still was on factory sway bar end links (Whoever did the lift bent the links so they...
Thanks for the info. I might just order my stuff from crutch field. And to make the 6.5s fit in the rear all I will have to do is drill some holes and run some self tappers?
I am wanting to get my sound system ordered tomorrow morning that way it can ship as soon as possible. I would really appreciate anyone looking over my setup and giving their opinions. I will not be running an amp (yet) but am hoping this head will put out good power. I am just wanting a clean...
so I shouldn't put the butyl over the current sealant. I am doing this as just a safety thing. I don't wanna open them up cause when I put them back together I don't want to reseal improperly. I just want something I can put as a second layer over the current sealant
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.