Recent content by GRN69CHV

  1. GRN69CHV

    Sold the '16 RAM 1500

    You would only pay tax on vehicle sale if it was depreciated in excess of cash value. I did not depreciate my vehicle. I did write off non-reimbursed business miles as sales expense, only using the legal mileage allowance.
  2. GRN69CHV

    Sold the '16 RAM 1500

    One month update (5 weeks actually). I've already put 3200 miles on the company F150, with a fair amount of running to do over the next month. The Ram had 83,000 on it, still ran really good, reality is, I'm better off with a company vehicle for the miles I put on it. Overall it's hard to...
  3. GRN69CHV

    Sold the '16 RAM 1500

    "Well, I would call this a win-win. You unloaded some debt, plus ownership and operating expenses and still have your transportation needs met" You're right, my wife said the same thing. Just not the same though, I take personal pride in my vehicles. Just not the same.
  4. GRN69CHV

    Sold the '16 RAM 1500

    I had talked about this while back. Company I worked for was cutting out vehicle allowances and requiring you to drive company provided vehicles only for work. Can't say I'm happy with the arrangement but it is what it is. Bought the truck Jan 2018 with 9400 miles on it, currently has 82500...
  5. GRN69CHV

    Fuel Economy - LT Tires or Temperatures ?

    I'd be real happy with 16 mpg average. With exception of handful of long drives I've take, I can't seem to get over low 15's, high 14's in winter. In this area, longest highway run I ever seem to make is maybe 15-20 miles before exiting and then back into urban stop and go traffic.
  6. GRN69CHV

    Manifolds leak again, options please

    For bolts to break a second time, I would be looking at the exhaust system mounts. Once manifolds are seasoned, they typically don't change.
  7. GRN69CHV

    Alpine system upgrade consensus?

    Great way to become deaf. Not even a question of will you get hearing loss, but only a matter of how long.
  8. GRN69CHV

    2015 Ram Hemi needs a new battery....suggestions?

    Just did same thing, Diehard Gold, and they put it in, took the old one right there, no core charge, no return trip.
  9. GRN69CHV

    Dealership fixed my manifold bolts!

    Just had my 2016 done couple weeks ago. My guess, the bolts were probably broken for a while. I would think the manifolds are seasoned by now and should be stable going forward.
  10. GRN69CHV

    5w20 vs 5w30

    If someone were to do the search and ID the valve springs for a 5.7 or 6.4 truck engine and the Hi-Po 6.4 in the cars chassis, I would bet the valve springs have significantly higher seat and open pressure. Manufacturer most likely spec'd a lubricant for cold flow over the widest range of...
  11. GRN69CHV

    5w20 vs 5w30

    Yes, still have it. We decided to keep it when the company truck arrives. It's in really good shape, fully loaded. Just put a new battery in, only service left to do is new belt and trans service. It will be come a garage queen. I owe $$$ on it, but I couldn't buy anything close to what I...
  12. GRN69CHV

    5w20 vs 5w30

    74,000 on mine now, ran 5W-20 per the spec up to about 60,000 miles. Made the switch to 5W-30 because I noticed a distinct tapping, which I assumed were the lifters. Turned out to be a progressively louder exhaust leak which really became more evident this past fall when temps started dropping...
  13. GRN69CHV

    Hemi carnage - All 8 intake valves bent after cam swap

    I haven't had one of these apart, some engines, the difference is hot as severe. Good luck with it.
  14. GRN69CHV

    Hemi carnage - All 8 intake valves bent after cam swap

    Are you sure the push rods weren't swapped position? I've seen bent pushrods, bent valves over the years due to cam phasing, severe valve float and incorrect pushrods.
  15. GRN69CHV

    Exhaust Manifolds | Warped

    Manifold repair Thursday - under warranty | DODGE RAM FORUM - Dodge Truck Forums Link to repair job on my truck.
See more

Latest posts

Members online

Total: 611 (members: 12, guests: 599)
Robots: 1,473

Forum statistics

Threads
195,623
Posts
2,872,659
Members
156,453
Latest member
Jems007

Share this page

Top