Recent content by JustMakingDreams

  1. J

    Front diff questions is it a Chrysler 8” Ifs or a 9.25

    8” gear then?
  2. J

    Got my 4.56's installed !!!!

    And this takes a Chrysler 8” ring gear? The housing being larger than the gear or what size ring gear?
  3. J

    Front diff questions is it a Chrysler 8” Ifs or a 9.25

    The part number on Chrysler website keeps showing a 2006 8.25 205mm So is this an 8” ring gear ? If so will USA standard so C8.0-IFS-c master differential rebuild kit And USA standard ZG C8.0-456 ring and pinion set work for the front diff being an 8” ring set?
  4. J

    Front diff questions is it a Chrysler 8” Ifs or a 9.25

    I can’t seem to figure it out. the vin decodes 205m I have 12 bolts on cover rock auto contradicts the cover bolts by saying the 8” has 10 bolts And I’m not certain what I have 2008 Dodge Ram 1500 has 9.25 rear Unknown front lol? Any help???
  5. J

    Got my 4.56's installed !!!!

    So here is a picture of the tag on the front and yeah I’m a dingus it says 3.92 right on it . But is it an 8”ifs 9.25aam 9.25 Dana the vina say 205 so is that an 8” gear? For front? I need to install the 4.56 in the front next. Any ideas ?
  6. J

    Got my 4.56's installed !!!!

    Ok so I got the 4.56 gear installed in the rear this evening! , Well suited for 35’s kinda stinks I was looking to put 38-40s on it soon lol so that is a little bit of a bummer I was initially assuming I had 3.55s I don’t know why but I did all my math on previously having 3.55s but after...
  7. J

    Got my 4.56's installed !!!!

    Here is a better view I’m fixing to grind it out so I can get the backlash within .06-.010 thousand And are you sure I have 3.92s? Hmm I couldn’t find a vin tag in the glove department and just assumed it was 3.55s guess I shouldn’t assume lol where is that info found?
  8. J

    2008 ram 1500 3.55 to 4.56 ring gear swap carrier switch issue ?

    You can see it in this picture
  9. J

    Got my 4.56's installed !!!!

    It looks like I may have to grind some of the rear housing to accept the gear. That’s the only thing I can find pertaining to the 06-08 range having maybe a slightly beefier rear housing and I have two headsets here CR925456 Richmond And zig C9.25-456 standard gear set thinking maybe there was a...
  10. J

    Got my 4.56's installed !!!!

    Hey bud my vin is 1D7HU18218S547920 2008 ram 1500
  11. J

    Got my 4.56's installed !!!!

    well sh$t I had some clearance issues with the carrier hitting the pinion at the two larger knuckle areas of the spicer 80754. lsd what brand gears did you install? I just tried Richmond excels with clearance issues.
  12. J

    Got my 4.56's installed !!!!

    did you resuse your stock carrier?
  13. J

    Got my 4.56's installed !!!!

    so I bought Richmond gears also from 3.55s to 4.56 I bought the cross pin also after installing and removing three times come to see that the the carrier would hit the pinion while spinning which carrier did you have ? or use ? and did you use your stock shim?
  14. J

    Got my 4.56's installed !!!!

    how did you do this? you had 3.55 stock so did I. did you reuse your carrier?? tried installing today had carrier pinion clearance issues
  15. J

    2008 ram 1500 3.55 to 4.56 ring gear swap carrier switch issue ?

    2008 dodge ram 1500 3.55 to 4.56 gear in rear with spicer 80754 carrier not clearing the pinion gear. I have the slightly beefier 06-08 9.25 housing. which if I a reading correctly will need ground down to clear the gear. what about the carrier? it hits when spinning ? from what I see guys...
See more

Latest posts

Members online

Total: 716 (members: 34, guests: 682)
Robots: 1,548

Forum statistics

Threads
195,653
Posts
2,872,950
Members
156,495
Latest member
DannyDang78

Share this page

Top