-
-
Here is mione 1.5" body with a 2" front level and 35x12.50 on factory wheels before and after -
1.5" body lift added to my eibach pro lift kit! First pic is next to my brothers 2007 F250 6.0 leveled with 35s on 20x10 -18mm wheels
-
Yep. Fwiw it’s cool. But it is a pain in the rear! They sit a little too high for anybody tall. I’m 6’4 and it’s comfy fit. Head room...
-
I was chasing one that turned out being the fender hitting aftermarket bumper. I ended up reinforcing the front body mounts to fix it
-
Just curious to see how many 2009 original owners are on here and how your Ram has fared over the years. I purchased my 2009 Ram 1500...
-
2016 2500 6.4 4x4 with 4.10 gears on a 5 1/2” BDS Radius arm lift with fox shocks. Full Badge and chrome delete, 10 % tint front and...
-
Well, it’s in. Been sitting on it since before Christmas but finally got some time today for the install, which was pretty...
-
Adamcr68 reacted to El_Lobo_Gris1500C's post in the thread Levelling or 3” lift that rides as close to stock as possible with
Like.
Well, I got the truck lifted, 4” ReadyLIFT SST kit with the Bilstein rear shocks, and 20x9 +1 offset Fuel Assault wheels (gloss and... -
3" spacer is way too tall. That is going to cause issues, maybe not at first but it will for sure down the road in the near future. How...
-
A clean look is 2" front 1" rear on 33's 2.5" and above is 35 territory
-
Adamcr68 reacted to ClassicJoe's post in the thread What did you do with your 4th Gen this week? with Like.
I drove to the farm and took down bow stands. I also added a Reese three ball hitch.
-
Adamcr68 reacted to bigdog85's post in the thread Levelling or 3” lift that rides as close to stock as possible with Like.
my 2010 i just used 2.5 inch top hat spacers factory upper arms and in the rear i used a 2inch under spring spacer im was running...
-
Just got my "WARLOCK"..2021 ..just cannot describe how smooth the Hemi is. A tad bit on gas but hey..pwer when you need it. Got the...
-
Adamcr68 reacted to Ken Camp's post in the thread What did you do with your 4th Gen this week? with Like.
Haven't had a chance to drive my 2018 in real good snow since I bought it in October, so had to take it out for a drive in good old...
-
Adamcr68 reacted to buckeyexx's post in the thread What did you do with your 4th Gen this week? with Like.
Installed new led low beam bulbs to replace the ****** halogen bulbs. We will see how well they do but they have to be better as long as...
-
-
Loading…
-
Loading…
Members online
- Smitty75
- rixter99
- Socalramfan
- Matt Bell
- jawzs2
- Clewis9593
- Firebird
- Dontra
- t0ymach1n3
- rschoenh1
- Lyle Longboat
- Jwithing
- pir8t
- Nicholas Cove
- Thomas Obieglo
- 8SpdHemi
- turkeybird56
- Pktatum95
- miwenner
- BWL
- Kevs10
- pvflyer
- jagman_xjs
- lpennock
- cvillechopper
- [email protected]
- RunsWithScissors
- Crusson
- Dodge 1500 4X4
- Cummins diesel
- Rambo2016
- wallacemf
- Loudram
- NCPowerwagon
- Tannerlupoli
- horace33
- MSgt0313
- FireCap2113
- Amstras1
- 6speed4.7
- TRCM
- JDSR
- rick1201
- DILLIGAF
- tzmndvl308
- Zackalikes
- jtolen
- Curtis2021
- geo1367
- bbb333