Recent content by LabRatt

  1. LabRatt

    2018 with UConnect 8.4 Screen delaminating.

    2018 with the same issue and a bit late to the party here. Did a bit of interweb searching and found this: Ram TSB #S2108000130 2020 RAM 1500 Affected Component: EQUIPMENT DATE PUBLISHEDMAY 28, 2021 NHTSA TSB #10198399 TSB Document Sorry, the NHTSA has not posted this TSB document yet. You...
  2. LabRatt

    Pedal Commander

    If you can wait, Black Friday deals may offer larger discounts. That's when I got mine last year. Sent from my SM-N950U using Tapatalk
  3. LabRatt

    Adding USB ports to rear console

    Glad it worked for you. For the center bezel, 2 on top, and take the top insert out. Depending on your year, there may be an additional torx screw in the right hand cubby. Then pull straight out with some force by grabbing where the top 2 screws were. It's held in very securely by many clips...
  4. LabRatt

    Adding USB ports to rear console

    Check the fuse (F90/91, I think) for the rear power outlet and see if you can move it from battery to the ignition position. Might solve your issue. Sent from my SM-N950U using Tapatalk
  5. LabRatt

    What did you do with your 4th Gen this week?

    I have a crew cab with the center seat. The vent plate comes off with the vents attached. I ran wires from the right side under the HVAC tube because it does bend upward from the floor to seal with the vents. With more patience the wires could go over the tube as well. Sent from my SM-N950U...
  6. LabRatt

    What did you do with your 4th Gen this week?

    Wife approved [<-- BONUS] a rear seat, USB port install because the kids couldn't charge their 100 devices last trip. Boggles my mind why there wasn't any ports for the rear passengers...but anyway. Thanks to @kad and his creative USB brackets, I now have four 3.0A quick charge ports (2 on...
  7. LabRatt

    AlfaOBD

    I believe it depends on the year of your truck. It is either in the EVIC or 8.4 screen. I do not have them in my EVIC at all. Wish they let you choose.
  8. LabRatt

    AlfaOBD

    I got them to show up on the 8.4 radio screen if you go through the Settings Menu, not in the EVIC. Still trying to get all 5 to show, my truck seems to like long naps before a change pushes through.
  9. LabRatt

    UConnect Software Update Received--What's in it?

    WOW!! Just stumbled across this thread, my 6-speaker 2018 has not received this U-Connect update yet. Its is still running 17.43.44 (App version 19.9). Hope I didn't just jinx myself.... After reading through the AlfaOBD thread, someone mentioned when they set their 6 speaker system to an 9...
  10. LabRatt

    AlfaOBD

    Posting that on the fridge @Ghost_RAM !! I got AUX buttons 1-4 showing up right now, but saw Config AUX PTO switches setting from POST #1051 that will show all 5. Waiting for my truck to hibernate right now to see if it kicks through.
  11. LabRatt

    AlfaOBD

    Read through 4200+ posts in the last 2 days.... :boxed: Where's my certificate of completion? Got DRLs, Fogs with High Beams, Window Global Down, and AUX controls showing on the 8.4 screen so far with no issues. Big thank you to everyone who has posted findings here. AlfaOBD is an outstanding...
  12. LabRatt

    What did you do with your 4th Gen this week?

    Changed the oil, installed a Fumoto drain valve, dropped in an AEM air filter and installed a Billet Technology Oil Catch Can. Received my OBDLink MX yesterday. Coupled with the M2 Mods security harness from @DeereGuy (BIG thank you!!), I'm ready for a long weekend of reading the AlfaOBD thread.
  13. LabRatt

    Morimoto headlights

  14. LabRatt

    Anyone added the aux switches to a 4th Gen?

    I don't do facebook either. I had my wife order one from 4th Gen using her account or I would have created one just for 1 order. Very responsive gentlemen and received the order fast. When you do pull the trigger, use Kad's clutch delete plate DIY for running the wires through the firewall...
  15. LabRatt

    What did you do with your 4th Gen this week?

    Installed the Aux switch panel from 4th Gen Ram today. Thank you to @kad for his clutch delete plate DIY. Made wiring through the firewall so easy and professional looking.
See more

Latest posts

Staff online

Members online

... and 1 more.
Total: 1,222 (members: 51, guests: 1,171)
Robots: 1,754

Forum statistics

Threads
195,629
Posts
2,872,743
Members
156,460
Latest member
blafer

Share this page

Top