Recent content by Leftysdad

  1. L

    Trac control / trialer light on

    The brake light switch is a "standard" Connects to pedal, part number is SLS514
  2. L

    Trac control / trialer light on

    Put it on scanner....came back bad brake light swith....replaced it, both light went off
  3. L

    Trac control / trialer light on

    No
  4. L

    Trac control / trialer light on

    My trac control light and my trailer light disconnected light have both came on at the same time...no loss of power or anything, just both lights simultaneously...any clue?
  5. L

    Brakes rubbing after new everything

    Any tricks to get the hub off....its the original one with 200k miles
  6. L

    Brakes rubbing after new everything

    Might as well get a new one as well
  7. L

    Brakes rubbing after new everything

    Ok....so it's the drivers side wheel bearing....this is a 2012 2wd....cant I just unbolt and replace the hub assembly.....I dont have take off the control arms and all correct ....not bolt to remove because its 2wd
  8. L

    Brakes rubbing after new everything

    So i put new rotors and new pads on my 12 ram and for 2/3 weeks everything was fine.....then yesterday, on BOTH sides, the pads and rotors are rubbing and roaring when I'm driving....still stops fine, and of course when I push the brake pedal it stops....any clue?? Thanks in advance
  9. L

    New coil pack and plugs/still throws p0307

    Stick with just stock cam and lifters? Daily driven truck with 180k miles (Changing oil and filter in the morning and checking for metal)
  10. L

    New coil pack and plugs/still throws p0307

    Cam and lifter replacement probably not a cheap job I'm sure....deff cant tackle that myself
  11. L

    New coil pack and plugs/still throws p0307

    So check the oil filter first....
  12. L

    New coil pack and plugs/still throws p0307

    Yes, tick
  13. L

    New coil pack and plugs/still throws p0307

    2012 ram 5.7 had a cel and said P0307 Miss fire on #7.... So replaced the coil pack and both (champion copper) plugs... Ran great for about 4 hours, then cel comes back on, and pulls P0307.... Bad injector??? Still runs good, but pulling same code Thanks in advance
See more

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,293 (members: 54, guests: 1,239)
Robots: 1,888

Forum statistics

Threads
195,687
Posts
2,873,323
Members
156,558
Latest member
zstroken

Share this page

Top