olyelr
- Posts
- 4,968
- Reaction score
- 3,754
Latest activity Postings About
-
-
olyelr replied to the thread Wanting to Lift 2021 Built To Serve 1 inch in front.Basically, installing a loaded strut is pretty simple overall. But having to swap springs onto a strut before install…better have the... -
olyelr replied to the thread Wanting to Lift 2021 Built To Serve 1 inch in front.Depending on where you take them to get the springs swapped onto the new shocks you may end up paying just as much as buying a loaded...
-
olyelr replied to the thread I pulled the trigger REBEL 2021.Nice pickup!
-
olyelr replied to the thread 2022 Rebel or 2500 Laramie.I have a ‘16 power wagon (2500 with 6.4) and a ‘17 half ton big horn 4x4 with the 5.7. Bought them both new. Both have around 120k...
-
olyelr replied to the thread Body lift and wheel spacers.Absolutely do not stack spacers on the bils.
-
olyelr replied to the thread Strong Antifreeze Smell.yea you are going through coolant somewhere and its probably super low. Definitely dont be driving it like that and overheating it.
-
olyelr replied to the thread Strong Antifreeze Smell.I had that minor/periodic antifreeze smell since my truck was brand new. 8+ years later and 120k miles i still get it once in a while...
-
olyelr replied to the thread 2023 PW Bilstein 5100 Front Shocks.Well…thats not the stock suspension.
-
olyelr replied to the thread 2023 PW Bilstein 5100 Front Shocks.I would think either of those places would have the proper part numbers.
-
olyelr replied to the thread 2019 5th gen power wagon lift.A 3-4” lift on a power wagon should get you close to the same height. But 35’s would almost look silly. Would probably want 37’s.
-
olyelr replied to the thread 65RFE to 8HP70 Swap , Lifted Truck Edition!.Tundra?
-
olyelr replied to the thread Want to tow 3200 miles, but no trailer brakes?.Sounds to me like hes not trying to just save a few bucks. Hes worried about the trailers that come with brakes adding too much payload...
-
olyelr replied to the thread Level Kit for 4th Gen Long Bed Cummins Question.Naaaa, dosnt really shift any weight at all. That heavy ass cummins is still sitting directly over the front axle, just a few inches...
-
olyelr replied to the thread Level Kit for 4th Gen Long Bed Cummins Question.Well if the track bar has a bunch of slop in it, that is obviously the first thing to replace regardless if you level it. As far as...
-
-
Loading…
-
Loading…
