S
skuppy069
- Posts
- 825
- Reaction score
- 393
Latest activity Postings About
-
-
Sskuppy069 reacted to SitKneelBend's post in the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM with
Like.
Here is generally what I'm picturing as the footprint of the new 12.1" screen mount. It will attach using only the two screws under the... -
Sskuppy069 reacted to SitKneelBend's post in the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM with Like.
Ok, I figured out my issue after replacing the BCM from my 2014 with a 2016 and the Occupant Restraint Control Module (ORC Module)...
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.Nope 18 .
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.When connected to the bcm make sure to set vehicle programmed status to yes
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.I have not .Is your settings the same for the air bags in the bcm ? Connect to bcm . Clear the faults and see which ones come back .
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.Not off hand .I think there is two bolts .I will look for a guide tomorrow for you . It should be pretty easy. I’ve done about 5 bcm...
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.Yep remove the park brake for sure . Don’t need to remove the cable . Just unbolt it and move to the side .
-
Sskuppy069 reacted to SitKneelBend's post in the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM with Like.
Also, I came across something that makes me think I'm not too off-base in getting this working. I had no idea the 12.1 radio was an...
-
Sskuppy069 reacted to SitKneelBend's post in the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM with Like.
Also, it looks like this kit will do the trick and allow me to plug in both the screen and HVAC module simultaneously although I don't...
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.68082364AC Is the lvds cable . You need to make a small conversion harness for the new display screen which will allow you to plug your...
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.I see so all you need is a atc sensor ,sun sensor and pin the atc harness into your connector at the hvac module .
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.You already have the hvac module in the passenger kick panel don’t you ? What bezel are you running now ?
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.I would test to see if the screen/radio will behavior with that ICS in the loop before fully committing to that setup
-
Sskuppy069 reacted to SitKneelBend's post in the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM with Like.
Seeing how modular this is, I'm wondering it I can make a new 8.4 bezel surround and elongate it to house just the 12" and completely...
-
Sskuppy069 replied to the thread Installing a 2019-2021 12.1 (UAX) Radio in 4th Gen RAM.Nope just find a switch with your lay out etc . The traction control light will always be illuminated but the switch still works fine .
-
-
Loading…
-
Loading…
