O

Orange_Ram

Junior Member 21 From New Jersey
Joined
Last seen
Posts
11
Reaction score
0

Latest activity Postings About

    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Question for everyone: What can I do or buy to help fix the vibration problem? I want to be able to drive the truck outside of the state...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Well, I jsut got new tires. I got a good deal on Landspider Wildtraxx Mts. 35x12.50R20. The trucks runs better with the new tires. But I...
    • O
      Orange_Ram reacted to Quick_Shifter's post in the thread Upper Control Arms with Like Like.
      Put the passenger side tire on the drivers side or rotate all 4 in an x pattern. Caster is not a live measurement so they should have...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Well I have no idea what upper control arms the previous owner had on the truck but I went with readylift and I will provide pictures...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Thank you for your response. And yes I will be changing them soon. Are toyo open country mts better than nitto trail grapplers I have...
    • O
      Orange_Ram reacted to Quick_Shifter's post in the thread Upper Control Arms with Like Like.
      Post more pics. How do rc shocks end up on a truck with a BDS kit? Let’s see the cross members in the front. Since the angles on your...
    • O
      Orange_Ram reacted to olyelr's post in the thread Upper Control Arms with Like Like.
      The shocks have nothing to do with ride height at the rear. Its the coils. Is there a spacer above or below them? The front looks like...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Also, I have these coils in the rear. I noticed the rear is an inch or so higher than the front. Could it be the RC shocks I have in the...
      • IMG_8002.JPG
      • IMG_8001.JPG
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Yes it is very good info. I am doing my research on each. But I went with readylift last minute.
    • O
      Orange_Ram reacted to BlackSheepRebel's post in the thread Upper Control Arms with Like Like.
      Lots of good info here hard to go wrong with JBA or core just be aware of threads where some complain about wheel offset not being...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      Sorry for being late. But here it is.
      • IMG_8003.JPG
      • IMG_8004.JPG
    • O
      Orange_Ram reacted to Nick@GotExhaust's post in the thread Upper Control Arms with Like Like.
      post a pic of your strut/coil overs. Lets see what you actually have in there 1st. Then we can try to figure out height and what UCA's...
    • O
      Orange_Ram replied to the thread Upper Control Arms.
      That is a good question. I am not sure to be honest, how can I tell if they are?? Also can I get opinions on the readylift UCA's?
    • O
      Orange_Ram reacted to Nick@GotExhaust's post in the thread Upper Control Arms with Like Like.
      So next question is, are your coil overs cranked up to add lift?
    • O
      Orange_Ram reacted to Nick@GotExhaust's post in the thread Upper Control Arms with Like Like.
      They do use a pre load spacer along with the spacer for the lift but I feel it is still not enough lift to run a angle correcting UCA...
    Show older items
  • Loading…
  • Loading…

Latest posts

Staff online

Members online

Total: 401 (members: 17, guests: 384)
Robots: 1,362

Forum statistics

Threads
195,678
Posts
2,873,191
Members
156,535
Latest member
Ftank

Share this page

Top