Recent content by RamminMopar
-
R
Some great Pentastar info
Alot of hate on the wrangler 3.6 but the ram 3.6 is loved, what gives?- RamminMopar
- Post #5
- Forum: V6 Engine & Performance
-
R
A.I. Ram...(Pics)
This AI should of designed the 5th gens- RamminMopar
- Post #2
- Forum: General Discussions
-
R
Synthetic Oil
Ran it for couple hundred miles to see if it would do anything- RamminMopar
- Post #47,007
- Forum: Engine & Performance
-
R
Synthetic Oil
Using a quart of mmo on the oil before and then running 5 30 castrol edge ep and mobil ep filter has kept my hemi relatively quiet all winter for about 4k miles, anyone else try that combo?- RamminMopar
- Post #47,000
- Forum: Engine & Performance
-
R
Need Help with an Oil Leak on a 2018 Ram 3.6L!
Jeeps with the 3.6 have been flooding the forums with oil cooler leaks because of the recent artic temps- RamminMopar
- Post #6
- Forum: Engine & Performance
-
R
should i regear 2011 ram 1500?
4.56 if you're planning to keep it awhile otherwise save your money- RamminMopar
- Post #9
- Forum: Lifted
-
R
Synthetic Oil
Most expensive oil change ive done, lets see how it goes lol- RamminMopar
- Post #44,370
- Forum: Engine & Performance
-
R
Buying a newer truck and have some questions
The rfe hemis benefit alot from regearing to 4.56+- RamminMopar
- Post #31
- Forum: General Discussions
-
R
Suggestions on lift and tire size
2 inches will visually level a 2500, Trac bar and control arms or brackets are worth doing down the road too- RamminMopar
- Post #10
- Forum: Lifted
-
R
4 wheel drive on Ram 2500
Its more limited but you dont have to worry about ripping cv boots all the time- RamminMopar
- Post #8
- Forum: General Discussions
-
R
6 cyl Etorque cant tow with 35's
In the city youll probably be about the same rpm because youll be a gear higher. Mostly only running higher rpms in the highway but youll be in OD and youll have enough rpm where it wont shift down very often and running very strong even with 35s.- RamminMopar
- Post #24
- Forum: Lifted
-
R
6 cyl Etorque cant tow with 35's
Id personally would go 456 or 488 but 410 if your not sure. You could also try sourcing an oem used 3.92 rear axle and get it put on- RamminMopar
- Post #21
- Forum: Lifted
-
R
Am I bad at shifting? Or……
Try pressing down just a couple inches or floating gears- RamminMopar
- Post #14
- Forum: General Discussions
-
R
Am I bad at shifting? Or……
Do you feather the clutch or fully depress it when upshifting?- RamminMopar
- Post #8
- Forum: General Discussions
