Recent content by sam-aye-am

  1. sam-aye-am

    Looking for Overhead dual microphone wiring location 2018

    Do you get any NVH feedback into the mic there? I ask as I tried something similar but put it in an empty switch panel in the dash of my VW golf TDI. No one could here me clearly with it mounted there as the actual mic body was in physical contact with the knockout switch panel and thus a...
  2. sam-aye-am

    Under front seat Subwoofers With Built In Amp

    I installed the Rockville 8” behind the back seat. For my personal preferences, this was just right in my truck. I tried to see if I could fit it under the passenger seat, but didn’t want to relocate the jack despite it being unlikely to be of any use to me should I need it since 95% of the...
  3. sam-aye-am

    Electrical box at passenger floorboard pic

    I’m pretty sure you are talking about one of the powertrain related modules if you have 4x4. If you do, then check out this link for some pictures: http://www.trucktrend.com/how-to/towing/1703-how-to-install-a-bd-2-low-unlock-kit-in-ram-3500/ Sent from my iPhone using Tapatalk
  4. sam-aye-am

    Comfort of Tradesman drivers' seat

    Your biggest cost variance will be in getting the seats. With front and rear seats in nearly brand new condition (dirty was all), wiring harness, and switch panel, I’m probably just shy of $2k. Harness from DeereGuy saves you a lot of the hassle, but you’ll have to be okay with pinning...
  5. sam-aye-am

    AlfaOBD

    As you and others have said this about the “AV/OEM” setup on aftermarket units with maestro...I went back out and looked again as I clearly wasn’t getting it. On my particular Kenwood, there is only an “AV” icon after entering setup. I must have tapped that icon a hundred times and saw the...
  6. sam-aye-am

    AlfaOBD

    Haven’t been able to make changes with the kenwood. Flashed the maestro several times when I first installed it...nothing has changed. Sent from my iPhone using Tapatalk
  7. sam-aye-am

    AlfaOBD

    Has anyone tried and succeeded in using Alfa OBD to change normal user programmable features like turning off the horn beep when locking doors? I had my tuck in for the T51 water pump recall and they flashed the BCM for another recall. I turned the vented seats back on with Alfa obd, but...
  8. sam-aye-am

    AlfaOBD

    I didn’t do anything specific to alphaOBD to get the soft keys. More likely due to the OBDGENIE module I bought that turned on the soft key, but didn’t actually enable them. I’m pretty confident you’ll be able to find a setting with alphaOBD. I just can’t point you to which one. Sent...
  9. sam-aye-am

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    To complete the circle on my install, I now have heated and ventilated seats installed and working in my 2015 tradesman trimmed truck. With DeereGuy’s harness and GhostRam’s help using alphaOBD software on a WIN10 laptop with OBDlink MX Bluetooth dongle, I was finally able to change both the...
  10. sam-aye-am

    AlfaOBD

    Thanks to the help provided by GhostRam, I now have ventilated seats in my tradesman trim level truck! Oh, and DeereGuy’s custom wiring harness too[emoji2] I took a couple tries fooling around. Had to exercise extreme discipline to not try and change other things I cane across before I...
  11. sam-aye-am

    Any California truck owners? Need answers on registration and weight fees

    Sounds like you are active duty as I am. CA will waive part of the overall fee for non residents. I can't remember if it is the registration or license fee....think it is the same one you used to be able to claim as a tax when you itemized your federal return. I could have gone a step...
  12. sam-aye-am

    AlfaOBD

    I'm trying to use the WIN 10 version. Was finally able to connect (I think) using COM5 on my laptop by selecting the "advanced options" and what everyone is recommending for a bluetooth OBD transmitter.--->OBDLink MX. I mistakenly selected the wrong BCM under the device list in the...
  13. sam-aye-am

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Neither is. After reading a bunch on the Dodge Dart forum today, that is what it looks like as the most likely to work with a PC. Sent from my iPhone using Tapatalk
  14. sam-aye-am

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Dude, that is awesome! Right now I'm struggling with getting a BT OBD device to connect to the alfaobd software (PC version as I have an Iphone). I got 2 different BT OBD devices that showed up the day I was heading out on a week long road trip. So far no luck and today is the first day of...
  15. sam-aye-am

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Any tips on where/which modules/configurations to look up using Alfaobd? Sent from my iPhone using Tapatalk
Top