-
-
SSD2020 replied to the thread Cam/lifter Kit.Does anyone actually get ahold of MMX? I have some of their stuff, but they don't answer emails or phones. I tried many, many times. My...
-
SSD2020 replied to the thread Low idle oil pressure, after high volume pump install..I would assume the shop did not use plastigauge. They did polish the crank. The cylinders are also 0.010 over now. I need to head over...
-
SSD2020 reacted to Fast69Mopar's post in the thread Low idle oil pressure, after high volume pump install. with
Like.
When the motor was assembled do you know if the bearing clearances were checked with Plastigage or were the journals mike'd with a... -
SSD2020 replied to the thread Low idle oil pressure, after high volume pump install..Dang, well this motor has new pistons and bearings in it already. The clearances should have been done right. Also to note, is the...
-
SSD2020 reacted to Fast69Mopar's post in the thread Low idle oil pressure, after high volume pump install. with Like.
I see a lot of 5.7 HEMI's on a weekly basis and I am always looking at what the EVIC says for oil pressure. 27psi is a touch low for...
-
SSD2020 reacted to Wild one's post in the thread Low idle oil pressure, after high volume pump install. with Like.
My cammed 5.7 idles at 50/51 psi hot with the idle rpm bumped up to 750,and sees 75psi hot at it's 6600 rpm shift points,and generally...
-
SSD2020 replied to the thread Low idle oil pressure, after high volume pump install..I just saw this thread. My 2011 has the MDS delete, same cam, same oil pump ( high pressure spring in ) After the engine rebuild my idle...
-
SSD2020 reacted to Wild one's post in the thread Low idle oil pressure, after high volume pump install. with Like.
It's going to cost you more then $400 to have a tuner up your idle rpm,as you'll still have to buy either a Diablo tuner,or HP's...
-
SSD2020 replied to the thread Looking to tune my truck, are tuners reliable? as in they won't brick the PCM..Ya, but my Diablo had the dropping idle glitch, so I got a custom tune anyway. I tried to go cheaper and it works but it’s not the best...
-
SSD2020 reacted to BANANA165's post in the thread Looking to tune my truck, are tuners reliable? as in they won't brick the PCM. with Like.
so because hp tuners is more of an actual tuning platform and not just a plug and play/pre-loaded tunes it doesn't actually come with...
-
SSD2020 reacted to DILLIGAF's post in the thread Looking to tune my truck, are tuners reliable? as in they won't brick the PCM. with Like.
Put it this way, if you decide to put long tube headers on, or even a 6.4 intake swap. You'll regret not having HP tuners. The hassle...
-
SSD2020 replied to the thread The 5.7 tick... Need advice..Parting out is good if you have the space to store the truck to do so.
-
SIf you like the rfe, the 2012 ram is the way to go, if you can find one with 3.92 gears, my argument for one of the best trucks ever...
-
SSD2020 replied to the thread Looking to tune my truck, are tuners reliable? as in they won't brick the PCM..Yep go to HP tuners for sure. I wanted just a quick plug in play for mine, but of course ended up getting a full tune so I should have...
-
SSD2020 replied to the thread Exhaust Drone Fixed! Spoiler Alert another 3.21 vs 3.92 discussion.The j pipe is an option. Most of the time I read that it helps but does not get rid of it completely, however it is still worth a try...
-
-
Loading…
-
Loading…
