Recent content by Steven Roethler

  1. S

    1989 W150 318 TBI to carb swap

    Looking for some assistance on swapping from tbi to carb. Motor is in with new carb, HEI distributor and a mild camshaft. Looking for some info on wiring to get it running and functioning without having to find a wiring harness from a pre TBI truck. Any info on wiring everything would be...
  2. S

    46re shifting issues

    Both bands have been adjusted to spec as well. I also replaced the speed sensor and that didn't do anything either.
  3. S

    46re shifting issues

    I have a '98 ram 1500 5.9 with the 46re and was looking for some insight on diaging the issue I'm having. Transmission shifts from 1-2 second at about 1800-2000 rpm no matter how hard I push the throttle pedal, then from 2nd straight into 3rd. Doesn't down shift even with pedal to the floor and...
  4. S

    Transmission slipping in and out of overdrive

    Fluid sample came back clean, not a trace of any clutch material or metal in it. I checked the codes and it has a p0740 for torque converter
  5. S

    Transmission slipping in and out of overdrive

    Forgot to mention, transmission was rebuilt and has less than 40k on the rebuild. Has an upgraded sonnax accumulator piston and a transgo jr **** kit installed. Fluid was changed less than 5k miles ago. Fluid doesn't smell burnt and still is a bright red color. Fluid level has been checked while...
  6. S

    Transmission slipping in and out of overdrive

    Started a few days ago, it will slip out of overdrive and back in repeatedly. Goes from 1600 rpm to 2100 sometimes up to 2500. Rpms also fluctuate with OD off. Replaced tps a few months ago. Any ideas would be appreciated, thanks!
  7. S

    Np435 wont go into first or reverse

    Also would like to add that with the tower off, the tower will go into first and reverse. The transmission will go into first and reverse if I manually move the gears into first and reverse
  8. S

    Np435 wont go into first or reverse

    I got a 1989 w150 that im swapping from auto to manual. I have an np435 out of a 79 powerwagon. I rebuild the shifter tower and put new bearings and such in. However I am not able to get it into 1st gear or reverse. 2nd, 3rd, and 4th all work fine. When I try to put it into first it pops in...

Members online

Forum statistics

Threads
195,850
Posts
2,875,166
Members
156,822
Latest member
iralee
Top