crash68
Reaction score
11,261

Latest activity Postings About

    • crash68
      crash68 replied to the thread Auxiliary gas tank.
      I would look into upgrading the main fuel tank to the larger 33 gallon version. It's probably takes just swapping the tank itself, the...
    • crash68
      crash68 reacted to WY-Dave's post in the thread Cummins maintenance advice with Like Like.
      I use fleetgard (cummins) fuel filters. I get them from the local big rig shop. I save about $80 over Mopar. The 5th gets are lucky...
    • crash68
      crash68 replied to the thread Ammonia sensor 6.7 2014.
      Ammonia sensor? Do you mean NOx sensor? That would be at the end/outlet of the SCR but before the muffler.
    • crash68
      The 3rd Gen EcoDiesel has a peak torque of 480 ft/lbs @ 1600 rpms, the 6.4 Hemi is 429 ft/lbs @ 4K rpms. Won't even mention the Cummins...
    • crash68
      @HighDesertRam you didn't offend anyone, you just need to pay attention to what section your posting in. Like I mentioned several post...
    • crash68
      crash68 replied to the thread Cummins maintenance advice.
      @2022 Tradesman you don't need to manually shift the transmission or anything else special for the truck to complete a regen other than...
    • crash68
      crash68 reacted to Dylankeller94's post in the thread Steering issue….. please help! with Like Like.
      UPDATE! I figured it out, it’s most definitely the wheel bearing! We got very lucky as it drove fine on our 1,300km trip and it...
    • crash68
      crash68 reacted to Wild one's post in the thread Steering issue….. please help! with Like Like.
      I'd quit driving it,till you find out whats wrong.If it's a bad wheel bearing/front hub and it lets go,the front tire can exist stage...
    • crash68
      crash68 reacted to Jeepwalker's post in the thread Steering issue….. please help! with Like Like.
      Lift the front wheel up with a floor jack (under the lower A-arm), and grab your tire at the 6 & 12 o'clock positions and shake in/out...
    • crash68
      Line-X offers Renew, it's designed to go over an existing bed liner: https://linex.com/bedliners/renew
    • crash68
      Given the typical design upgrade cycle it's a good probability it will just take upgrading the hardware, maybe some minor BCM config...
    • crash68
      crash68 replied to the thread Trailer sway.
      Depending on the truck cab/body configuration There's maybe a 100-150 lbs difference of the front axle base weight. The EcoDiesel isn't...
    • crash68
      crash68 replied to the thread signal wires.
      Use this plugged into the back of the 7pin trailer plug: CURT 56584 Replacement Vehicle-Side Custom USCAR 5-Pin Trailer Wiring Harness...
    • crash68
      crash68 replied to the thread Trailer sway.
      Find a semi truck CAT scale and weigh the truck and trailer fully loaded like your headed out camping. Then drop the trailer and weigh...
    • crash68
      crash68 replied to the thread correct speed.
      You can use AlfaOBD to correct the speedometer along with other BCM configuration changes. As for the "delete shut off, shut down" part...
  • Loading…
  • Loading…
Top