Recent content by TylerB

  1. TylerB

    65rfe is crap. need a solution

    Oh yeah for sure they do, they'd be the only ones I trust with it. I just can't do it, I don't love my truck that much to drop twice it's worth into a trans, if be better off spending that on an 8spd truck.
  2. TylerB

    2016 Ram R/T 12.549 @ 107.4

    Nice Gary, glad to see that thousandth there in the title, could have been very misleading otherwise.
  3. TylerB

    65rfe is crap. need a solution

    That was straight from the owner who has done a couple NAG1 swap. That's to get installed and working flawlessly like it came from the factory like that, no codes and the electric gear select still works.
  4. TylerB

    Adding Horsepower

    Yours is an exception with a little bit of work in it lol
  5. TylerB

    Adding Horsepower

    Yeah they are. Real fun with little 30" tires. Ok then, I'd check out some pacesetter or hedman headers with a their catless ypipe then Greene tune and maybe even one of his cams.
  6. TylerB

    Adding Horsepower

    Don't bother with the intake manifold swap, while the trucks are the ugliest of the bunch they are the best performers flr the trucks I agree, 4.56s are gonna make the most noticeable difference, but they're also going to cost the most, could be as much as $2000 for 4wd. Those 35s need the...
  7. TylerB

    Rear bump stops

    I cut the cup off and used a set of Belltech bump stops just the ones they give you for the front in their kit. When you cut off the cup you'll see a hole in that mount the cup was welded to. I opened up the hole just enough to slip a folded a toggle(butterfly)nut fitted on the bump stop's...
  8. TylerB

    3:55ZF to 4:10 ZF FROM MOES REVIEW

    You're gonna love it. Don't be surprised if you see an small increase in mpg too if you can keep your foot out of it long enough to cruise and keep it at 70 on the highway.
  9. TylerB

    What did you do to your Gen3 today?

    I heard it helps to put an additional coat of clear on the lights to keep the stock clearcoat from putting and peeling. This two part spray clear works pretty good, at least better than typical spray clear. Spray Max 2k
  10. TylerB

    Wanting to drag race on the track...

    Check out Hemi Truck Club. We have a pretty significant Florida chapter, we usually go to Orlando Speedworld.
  11. TylerB

    65rfe is crap. need a solution

    Ah yeah, been watching your build on HTC
  12. TylerB

    65rfe is crap. need a solution

    I can't speak for the 727 being a direct fit exactly, but I know it uses the same bellhousing bolt pattern as the modern Hemi. I wouldnt recommend the 727 for a street truck unless you can deal with only having 3 gears (high revs without the overdrive gear). I do know that the 518 is a...
  13. TylerB

    65rfe is crap. need a solution

    Pretty sure he's already boosted and meant he wants to up the boost.
  14. TylerB

    65rfe is crap. need a solution

    I was quoted $10k for a stock NAG1 from them and $17k for their built NAG1.
  15. TylerB

    65rfe is crap. need a solution

    I'm doing a 518 which is a just 727 with an overdrive. It can be built to 700whp pretty inexpensively($2000-3000). Rebuilds if done yourself, can be done for about $200. For a little more money($5000), you can do a 4l80e with a standalone controller that will hold 1000whp.
See more

Latest posts

Members online

Total: 302 (members: 8, guests: 294)
Robots: 1,299

Forum statistics

Threads
195,678
Posts
2,873,185
Members
156,533
Latest member
JustinRam1500

Share this page

Top