Lifted 4th Gen Pics - Show Em Off!

GIJoe2010 · Dec 17, 2018

crazykid1994 said:
Anyone running 275/65r20 on the stock express rims leveled?

2014 Express quad cab, 4x4 HEMI 1500 on Cooper Discoverer ATP 275/65R20 on OEM wheels. Leveled with Bilstein 5100s at 2.8” up front, a 3/4” rear spacer by Top Gun Customs and 1.5” Supreme Suspension wheel spacers to “untuck” the wheels/tires.

bpwarner · Dec 17, 2018

rwhjr said:
Do the 6” kit

These trucks look great with it. And considering they sit like a mini van from the factory the 6” lifts are perfect with 35s!

Does going with 6” make it too tall though? Or rough riding? I have a year old that my wife already struggles putting in the truck at stock

shadowhawk · Dec 17, 2018

running boards

the problem with a 6" lift can be parking it, either in your own garage or a parking garage. They look great, though.

6.7CumminsDrvr · Dec 17, 2018

bpwarner said:
Does going with 6” make it too tall though? Or rough riding? I have a year old that my wife already struggles putting in the truck at stock

Rough ride is mostly due to tire selection. The suspension has some effect but not nearly as much as the tires do......

dirtyd1833 · Dec 17, 2018

hemipwrd said:
Just got my lift installed. Zone 4/3 with bils at 1.4. Left me with 1/2” of rake.

Sent from my iPhone using Tapatalk

Damn good looking rig, 35" tires? Thinking about the same size lift since it should still fit in the 7 foot garage I have to park in at work.

Sent from my SM-N950U1 using Tapatalk

4eyedconekiller · Dec 17, 2018

GIJoe2010 said:
2014 Express quad cab, 4x4 HEMI 1500 on Cooper Discoverer ATP 275/65R20 on OEM wheels. Leveled with Bilstein 5100s at 2.8” up front, a 3/4” rear spacer by Top Gun Customs and 1.5” Supreme Suspension wheel spacers to “untuck” the wheels/tires.

View attachment 149484

View attachment 149485

View attachment 149486

Those stock flares?

GIJoe2010 · Dec 17, 2018

These are them:

https://www.ebay.com/itm/2010-2017-...024398?hash=item466ddebc0e:g:lHQAAOSwCJxaAhqk

I just had to add 3M double sided tape, otherwise they fit pretty well and look good for knock offs

hemipwrd · Dec 18, 2018

dirtyd1833 said:
Damn good looking rig, 35" tires? Thinking about the same size lift since it should still fit in the 7 foot garage I have to park in at work.

Sent from my SM-N950U1 using Tapatalk

Yep, running 35’s

Sent from my iPhone using Tapatalk

BOWERSFJ · Dec 18, 2018

hemipwrd said:
Just got my lift installed. Zone 4/3 with bils at 1.4. Left me with 1/2” of rake.

Sent from my iPhone using Tapatalk

Perfect ... Of course I’m a lil biased ... Lol

Sent from my iPhone using Tapatalk

rwhjr · Dec 18, 2018

bpwarner said:
Does going with 6” make it too tall though? Or rough riding? I have a year old that my wife already struggles putting in the truck at stock

Now when it comes to that it’s a different story. I have a 2 month old and the baby seats in the back middle seat. It definitely takes more effort but I don’t think the 4” kit is any easier to be honest with regards to this because either way you’ll have to use the sidesteps to accomplish getting the baby seat in...

bpwarner · Dec 18, 2018

rwhjr said:
Now when it comes to that it’s a different story. I have a 2 month old and the baby seats in the back middle seat. It definitely takes more effort but I don’t think the 4” kit is any easier to be honest with regards to this because either way you’ll have to use the sidesteps to accomplish getting the baby seat in...

Yea I figured. I have steps on already that came with my ram. Ive been looking a lot at differences in the heights and I think I’m gonna stick with the 4”.

Sent from my iPhone using Tapatalk

hemipwrd · Dec 26, 2018

Well after a little settling in the rear I only had about 1/4” of rake at best, which to me, left it looking so dead level that almost appeared nose high. Since I ended up replacing the UCA’s I decided to lower the front struts to .07, now I have a constant 1/2”-3/4” of rake. Which is exactly where I want it to be! Very happy with the current stance.

Sent from my iPad using Tapatalk

co-pilot · Dec 27, 2018

hemipwrd said:
Well after a little settling in the rear I only had about 1/4” of rake at best, which to me, left it looking so dead level that almost appeared nose high. Since I ended up replacing the UCA’s I decided to lower the front struts to .07, now I have a constant 1/2”-3/4” of rake. Which is exactly where I want it to be! Very happy with the current stance.

truck looks perfect!.......if you don't mind when ya get a chance could you give fender hight measurments please.....
Sent from my iPad using Tapatalk

Ofishl1 · Dec 27, 2018

The rake looks perfect to me too, although looks are always subjective to the beholder, my BDS 4 inch with 3 coils in the rear are not enough to take the sag out from the Shell, I ordered 1.5 inch motofabs to slip in the rear coils, hope to sit like yours when they are in..

SuthrnRAM · Dec 27, 2018

hemipwrd said:
Well after a little settling in the rear I only had about 1/4” of rake at best, which to me, left it looking so dead level that almost appeared nose high. Since I ended up replacing the UCA’s I decided to lower the front struts to .07, now I have a constant 1/2”-3/4” of rake. Which is exactly where I want it to be! Very happy with the current stance.

Sent from my iPad using Tapatalk

Man that looks awesome! I wonder if I will notice much of a difference going to a 4" from being leveled with bilsteins? I've looked at a few trucks recently in person, two had 6inch with 37s and another had 6 inch with 35s, I still haven't seen a 4" kit on the rams.

hemipwrd · Dec 27, 2018

SuthrnRAM said:
Man that looks awesome! I wonder if I will notice much of a difference going to a 4" from being leveled with bilsteins? I've looked at a few trucks recently in person, two had 6inch with 37s and another had 6 inch with 35s, I still haven't seen a 4" kit on the rams.

That’s the setup I had before going to the 4”. I thought the same thing, it’s a noticeable change. Wish I would have done it sooner. Makes a big difference!

Sent from my iPad using Tapatalk

jgruberman · Dec 28, 2018

Alright, it was a nice day the other day and I had just washed the truck and went for a drive.

Sent from my SM-G965U1 using Tapatalk

shadowhawk · Dec 30, 2018

hemipwrd said:
That’s the setup I had before going to the 4”. I thought the same thing, it’s a noticeable change. Wish I would have done it sooner. Makes a big difference!

Sent from my iPad using Tapatalk

I'd be interested in those fender measurements too

hemipwrd · Dec 30, 2018

shadowhawk said:
I'd be interested in those fender measurements too

When I had the bilsteins at 2.8 my measurements were....
(Measured from ground to fender lip)

Front 39 3/4”
Rear 40”

With the lift my current measurements are......
(Measured from ground to fender lip)

Front 43 1/4”
Rear 43 7/8”

Sent from my iPad using Tapatalk

JoshR104 · Dec 30, 2018

jgruberman said:
Alright, it was a nice day the other day and I had just washed the truck and went for a drive.

Sent from my SM-G965U1 using Tapatalk

Nice rig what setup are you running? Looking to level or lift my megacab as well.

Lifted 4th Gen Pics - Show Em Off!

No sh*t, there I was . . .

Member

Senior Member

The Dude abides………

Member

Senior Member

No sh*t, there I was . . .

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page