OEM LED CHMSL with Cargo Camera connected to 8.4RA

DeereGuy said:

I’ve posted the whole process of what needs to be done to make it work over at this thread. I’ve built several of these harnesses for people now, and use the i440 connector to get power, ground, and Lin. Depending on the trim of your truck you may just need to go to the green connector behind the headlight switch and not all the way to the radio connector.

https://www.ramforum.com/threads/installing-oem-backup-cam.53505/page-102#post-1404552


Sent from my iPhone using Tapatalk

Click to expand...

Deepc6 said:

Hello DeereGuy,

I have a question regarding the install, I have a 2016 with 8.4 screen. Currently I have a PAC BCI-CH41 which acts as my navigation bypass with extra inputs from camera via a RCA input. I have access to a mopar 68163937af third brake light with camera. Is there a way to make a harness for this to make it work?



Sent from my iPhone using Tapatalk

Click to expand...

Mpgrimm2 said:

Another option for @DeereGuy ....
fill out the contact form at www.kaodtech.com

Thanks,
Mike G.

PS: we both have regular full time jobs in addition to the harness work but try to get back to everyone as soon as possible.

M² Mods.

Click to expand...

icetraxx said:

I never heard back either so I ended up making my own. I followed the instructions in this thread https://www.ramforum.com/threads/oe...amera-connected-to-8-4ra.125421/#post-1805236 Finished up the install this weekend. Had one hiccup. The diagrams I found showed the pinouts as from the front of the connector not the wiring side. I was 1 wire off on the harness to the radio. I only needed the power wire and ground for the connector in the drivers c pillar. The canbus wire might be needed for the alignment lines, but I didn't need them. I just wanted the view of the bed. Works great though.

Click to expand...