Search results

  1. Mark247

    High Flow Cats

    What all would one need to replace the stock exhaust with the jba long tubes? I like the arh set since its complete but would love to save some coin on the jbas
  2. Mark247

    Dealership damage repair

    Ok I'll go ahead and get it repaired. Thanks!
  3. Mark247

    22" RT Rims

    Those look sick! I will go that route if nothing else works out but I was hoping to keep them nice n shiny!
  4. Mark247

    Dealership damage repair

    I got an oil change at the local dodge dealership and when it was finished I noticed a small dent on the hood of my truck right where the latch is. It looks as if the mechanic didn't fully shut the hood so he pushed down to lock it but accidentally cracked and dented the hood. Now after talking...
  5. Mark247

    22" RT Rims

    I recently purchased a set of rt wheels and the guy had them plastidipped but peeled it off before I bought them. He seemed to either rough them up for the plastidip to stick or maybe tried polishing them possibly? But either way there's fine scratches ALL over the rims, it's not too noticeable...
  6. Mark247

    2013 dodge ram oem grille assembly

    how much would you do all items to make it fit on 2012 ? just curious if it would be worth it over a dealership
  7. Mark247

    Retrofit projector headlights for sale

    any idea how much it would cost for shipping an item this size?? I just got hit with a huge expense which sucks but I want to try and get these lights before theyre sold! Also what is the light output like at night? Ive never had or driven in a vehicle with projector lights so I am curious if...
  8. Mark247

    Retrofit projector headlights for sale

    Wicked headlights, wouldn't mind grabbing these off you. Where are you located? I'm in southwestern Ontario but have a friend in nnew York who would let me ship to his address
  9. Mark247

    Moog front Endlinks for lowered 4th Gen

    what are these used for? would they work on a 4x4?
  10. Mark247

    Warranty almost up.

    Ok will do! ive had a problem with my 3rd brake light going out after going thru the touchless car wash so hopefully there is something they can do. Also I have noticed a bit of a wine from the rear end or possibly the tranny when cruising in a manual selected gear. could be nothing but has...
  11. Mark247

    Warranty almost up.

    Hey so I have almost reached the end of my 60,000 warranty and was thinking on my next oil change is there anything in particular I should get them to check to make sure I have possibly one last fix under warranty before its gone. thanks for any tips, all are appreciated
  12. Mark247

    2013 dodge ram oem grille assembly

    I have been looking for a bumper and grille assembly forever! unfortunately I am in canada and that sucks! GLWS
  13. Mark247

    Strictly the 4x4 lowering thread...

    Will you need anything extra thats not included in the Groundforce 9983 kit for the 4x4 reg cab rams? I see people posting about sway bar end links and track bar relocators.. is it needed or just suggested?
  14. Mark247

    HOW TO: 2013+ LED Tails into a 4th Gen

    Hey after reading this thread over and then over again I determined I have the same situation as you, the newer tails but luckily I had the reverse light harness included. So my question is, do I just need to go ahead and follow the OP for them to work or is there something I'm missing here...
  15. Mark247

    Cutting Springs on 4x4 1500

    So I am saving to get the Groundforce 9983 RCSB lowering kit for my 4x4 '12 ram 1500 but in the mean time I was thinking of cutting all 4 springs enough to change it from stock to a more levelled lowered look. My question is can this be done without wrecking anything? And how much can I...
  16. Mark247

    Performance mod questions

    What is the main advantage of running an aftermarket tq converter?
  17. Mark247

    Best Hemi Tuner?

    I have a question regarding the hemi fever tunes. I want one bad but am unsure if I can afford to run 91 at all times. Can I switch from 89 tune to the 91 or even 93 tunes without to much of a hastle beside filling the tank with a different grade?
  18. Mark247

    SRT wheels for trade

    I'll buy ya a set of srt 22"a for your rt wheels lol
  19. Mark247

    For Sale: McGaughy's 4th gen spring lowering kit

    Would this kit possibly work for a 4x4 reg cab 12' ? In ontario
  20. Mark247

    HELP! Engine noise ID.

    Took it into the dealer and wouldn't you know the noise stopped by the time I made it there/ go figure! One of the techs thought it would of been a collapsed lifter caused by MDS malfunctioning when it was shutting down one of the cylinders. Said it would be the first time hes seen such a...
  21. Mark247

    HELP! Engine noise ID.

    I will be taking it in tonight or tomorrow. Unfortunately we are getting a wonderful snow storm today so a lot of businesses and roads are being closed. Would hate to break down in the middle of nowhere waiting for CAA! lol Ill check back with the problem once its figured out
  22. Mark247

    HELP! Engine noise ID.

    Here is the Video of the sound. Only could upload to youtube so please have a listen ! thanks https://www.youtube.com/watch?v=olEDgQTbzW8&feature=youtu.be
  23. Mark247

    HELP! Engine noise ID.

    Hey I haveno idea what this could be I'm definitely no mechanic. Just happened on the way home from work. a loud knocking from right cylinder bank and can be heard ticking through the echaust , will upload a video tmrw (dang iPhone) Thanks
  24. Mark247

    ARH Longtubes with Cutout

    Where would you reccomend putting the cutout?
  25. Mark247

    ARH Longtubes with Cutout

    2010 Dodge Ram HEMI American Racing Headers w/ QTP Electric Cut-Out Open - YouTube the link above is of a badass sounding ram. question is would you need the longtubes to get that nascar sound? or would a regular manifold with cutout be roughly the same ( obviously not going to be exactly the...

Latest posts

Members online

Total: 573 (members: 20, guests: 553)
Robots: 1,576

Forum statistics

Threads
195,678
Posts
2,873,179
Members
156,533
Latest member
JustinRam1500

Share this page

Top