Search results

  1. njohnson6425

    Transmission question

    Crap.. Stupid phone.. I have a 2008.. Sorry
  2. njohnson6425

    Transmission question

    What year 545rfe transmissions fit the 200i Dodge ram 1500 4x4 with the 5.7 hemi? I'm looking to get a spare transmission to put away and I see all kinds of 2009 and 2010 that has the 545rfe for cheap and low miles. Just wanted to know what years would fit my truck
  3. njohnson6425

    2008 dodge ram 1500 quad cab under rear seat sub box

    I went ahead and sold all that due to not enough cubic feet needed for those subs. I went with the fox Acoustics ported box that hold 2 12s with 1.55 cubic ft each side. The box is tuned to 34 HZ and I have 2 12 inch skar audios @ 4ohm each. They are wird down to 1 ohn on a Skar 1200.1D amp. I...
  4. njohnson6425

    2008 dodge ram 1500 quad cab under rear seat sub box

    I have 2 10 inch kicker solo baric L7 dual 2 ohm subs and the Kicker 46CXA12001 CXA1200.1 amp. I'm having trouble trying to find a box to fit. I know that I can buy a box that has 2 10 inch round cutouts and I can just cut the squares for my subs but need to know what the best box is and the...
  5. njohnson6425

    Cam parts list

    I'm going with the Comp thumpr cam. It has an extremely aggressive idle. I'm going to keep the muffler on then.
  6. njohnson6425

    Cam parts list

    I have a question for anyone who can answer. I'm getting conflicting answers. I have a 2008 Ram 1500 with the 5.7. Im getting long tube headers with a catless y pipe on next week. Im about a month I'm have a cam installed (I want that heavy lope sound) but wanted to know about the muffler. I...
  7. njohnson6425

    Key fob programming

    I lost one of my 3 button key fobs for my 2008 Ram 1500. Of course a dealer says about $200 for a new key and programmed however I can find the exact looking uncut key for under $20. From what I read it's pretty easy to program as long as you have one of the original keys which I do. Has anyone...
  8. njohnson6425

    Gears

    Any suggestions on what LSD to get?
  9. njohnson6425

    Gears

    No I do not have LSD. I wish I did..
  10. njohnson6425

    Gears

    4.56 it is.. I'll order some for the rear and front.. Thanks for your help guys..
  11. njohnson6425

    Oil catch can

    Is it possible to install an oil catch can on a 2008 Ram with the 5.7 without some modification? Is the PCV internal on this motor?
  12. njohnson6425

    Gears

    I was wanting to change my gears from a 3.92 to 4.10 in the both rear and front.. Any suggestions on the brand? We pull a 9000 lb camper and the 3.92 does a pretty good job where we go camping however when we go camping in Tennessee the mountains really kill me. I just want the gears that will...
  13. njohnson6425

    Tow mirrors

    Yes, They are a little pricey. The price went up because I paid $150 for them.. They do look good though
  14. njohnson6425

    Ok stupid question?

    Sounds like an internal mode switch issue. That's usually caused by a faulty wire most of the time. This is on a different car but the box around the P R N D is missing.. Watch this video. It may lead to fixing your problem but then again it may not..
  15. njohnson6425

    Tow mirrors

    I got these for my 2008 Ram 1500 and they fit awesome and look great. Had to run extra wire for the turn signal and puddle lights SodaStream 1-Litre Source... https://www.amazon.com/dp/B01N6DOYPF?ref=ppx_pop_mob_ap_share
  16. njohnson6425

    Tow mirrors

    These
  17. njohnson6425

    CV axle stuck

    I am having a real difficult time trying to get my CV axle on my passenger out. I have tried everything except a torch and knowing my luck I'll be a truck short after using the torch. I wonder if it's a good ideal to remove the solenoid off the housing and remove the seal and front inner...
  18. njohnson6425

    Rear sway bar 2008 Ram 1500

    I'm a little confused with what I'm gathering. I have a 2008 Dodge ram 1500 quad cab 4wd with the hemi. I'm seeing different things online about the 2008 having a rear sway bar.. Now I know for a fact that my truck does not have one. Is there a kit that you can get to add it on the rear? I do...
  19. njohnson6425

    2008 4x4 Steering damper

    I was wondering if anyone has added a steering damper on their Ram? I'm replacing my shocks both front and back along with inner and outer tie rods with all ball joints and upper control arms. I saw a 2500 with it and wanted to know if adding one would be beneficial. I have a 1500 with the hemi...
  20. njohnson6425

    Changing from 3.92 to 4.56 gears?

    I apologize about the weight of the camper. The dry weight is 7908. The GVWR is 9600. I have the 3.92 gears. The transmission temp maxes out to about 215 degrees and that's going through the hills of Tennessee. I also have 33in murders with 2 inch wheel spacers. 2000lb air bags. Sure getting a...
  21. njohnson6425

    2008 Hemi revs up and down

    I'm kind of puzzled. When I start my truck the rpms will flex from about 600 up to 1500 and will keep doing that. sometimes it stops but for the most part it doesnt. When the truck is in drive or reverse it's ok and doesnt do that. Today I started it and it wanted to die but again when I put it...
  22. njohnson6425

    Changing from 3.92 to 4.56 gears?

    Was wanting some input. I have a 2008 Dodge ram 1500 quad cab with 5.7. I currently have a 36 foot 9200lb dry weight pull behind camper. I currently have the 3.92 gears in it. I'm wanting to know that if I get the 4.56 then I know I have to get the gears for the front transfer case but do the...
  23. njohnson6425

    2008 Ram 1500 5.7L transmission cooler questions.

    Where did you get your transmission Pan from?
  24. njohnson6425

    2008 Ram 1500 5.7L transmission cooler questions.

  25. njohnson6425

    Intake manifold

    I have a different hood on my truck now and its fiberglass and it does sit lower then the factory hood so yeah, your right. I figured the factory intake was good enough. I have alot of other mods on there anyway.. Thanks..

Latest posts

Staff online

Members online

... and 14 more.
Total: 1,476 (members: 64, guests: 1,412)
Robots: 1,896

Forum statistics

Threads
195,693
Posts
2,873,373
Members
156,566
Latest member
goku1028

Share this page

Top