I built one for under the center seat it is a sealed box for a 10 inch built to spec for pioneer sub look in this forum I made a writeup and posted pics
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Its a 1500 I don't think 3500 springs will ride very good on a 1500 might be a little stiff. It dems like a lot of work to keep popping out the spring and cutting a half coil at a time. Wish there was an easier way to do it. Doesn't it mess the ball joint up when your smacking it with a ball...
i have seen where some people have problems with cutting springs. is that because they are cutting old springs?
will the front end be able to be aligned and stay in alignment?
i don't know the differances but i cant even find spindles with out springs.
i was wondering if i could just cut 2 more inches off of 2 inch lowering springs?
i want to lower my front end 4 inches on my 01 but i cant find a kit for 2001 that has springs and spindles it seems like they all skip 2000 and 2001. is there any way to lower the front 4 inches?
FYI my passenger window and both door locks quit and it wa the connector to the switches on the passenger side door. the driver window still worked fine. both door locks did not work. i unplugged and plugged the connector and it fixed it
I started with going to the junk yard and buying a center seat for $15 (I didn’t want to mess up my seat if it didn’t work).
I unbolted the armrest from the bottom of the seat and took off the seat cover. The metal frame just slips out of the cushion.
Then I cut out all but about ¾ of an inch...
I don't rember the dimentions but I can measure it again.
I found the deminsion I needed by the speaker requirements. The pioneer speaker I used required like 1 cubic foot of air space and I built the box deeper in front then the back and I had to cut out some of the foam in the seat cushion to...
The stuff I used no sandpaper no scratch-x just a paper towel and light rubbing. It did mine in less time than having a smoke
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
MB Razor Wheels from discount tire $101 ea and the tires are Hankook 275 60 17 VENTUS ST RHO6 $110 ea
i got the tires and wheels for less than just the tires that are on my 18's
it sounds great with the down fire the sound fills the truck from all over its not like you have the sub right in your ear. i know pioneers arent the best speakers but if the box is built right you can make just about any speaker sound good!
You can try a heat gun or blow drier and a can of compressed air. Heat it up and spray canned air up side down and they pop right out easy and cheap if some do not pop out then pay to get them removed. Search utube and watch
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Here is a pic but since its wiped on it hard to do ruff surfaces. look at the smooth spot under the B. I used a paper towel so ignore the white specs.
it did clean the tire though. i guess the spray kind would do better on tires
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.