Search results

  1. C

    Crank Damper Leaking Oil!

    I thought it sounded like a good excuse.. Oh well, I'm trying to buy a new bike so I can satisfy my speed itch more easily. Guess I should wait on the cam.
  2. C

    ATI 15% Underdrive Pulley

    Has anyone else run into an oil leak after an ATI damper install?
  3. C

    Crank Damper Leaking Oil!

    Installed a new ati underdrive crank damper, after about 3 months and a couple hundred miles its leaking oil. Is the 4th gen the same as the 3rd gen, with only a seal on the timing chain cover? If the cover should be removed to properly change the seal should I add a new cam at the same time...
  4. C

    performance oriented lowering springs

    Thinking about it.. Seems like the best option so far, but the front geometry still needs to be fixed so I want to actually talk to a suspension/chassis shop about modifying the front and rear geometry first. Unless someone has a better idea.
  5. C

    Cam and heads

    Is there any reason not to get your heads and cam from the same shop? I'm looking at Inertia as they are close to where I live. A mid range cam with ported heads and a slight compression increase seems like it'd give the truck a nice kick..
  6. C

    srt-10 conversion?

    I'm talking to Penske about front coilovers with the stock mounts. I plan to send them a set of Belltch shocks to work off of to develop a setup for a 2/4 stance.
  7. C

    Cam comparison?

    Can anyone provide any input on the cam options out there? (5.7 8 speed, 3.92 gears) 1. Inertia motorsports (local) 2. Arrington 3. Comp cams 4. Moe's 5. Jay Greene I'm looking for more hp and torque, would like to keep the lower rpm power tq about the same and increase the top end as...
  8. C

    performance oriented lowering springs

    After talking to QA1 for a while, I've decided to try other shops. Penske says that they can build a custom front coilover to work with the stock mounts with a double adjustable setup and springs to match. Cost should be around $650 per coilover. Does anyone have any plans to redo the front...
  9. C

    srt-10 conversion?

    The new suspension parts made a big difference. I did most of my upgrades at one time thought, so its hard to pinpoint which changes made the most difference. I still need to fix the front and rear suspension geometry and I'm not happy with the belltech sport shocks.
  10. C

    light weight drive shafts?

    So has anyone gone to a one piece shaft on an 8 speed yet? I see carbon in my future...
  11. C

    The Dubstep Shep R/T Build

    They wanted like $2500 for aluminum, around $1k for steel. I need to give them a call again. The roads here are too bumpy to not have a sorted suspension at speed.. I'd like to go with a drop spindle and coil overs to fix everything up front..
  12. C

    Nitrous Install Pics

    I have both switch types. I'd like to run the electric type, but didn't really want to tie in at the throttle body. That will work though. :) Thanks for your advice as always! Should have my custom shorter lines and all fittings put together tomorrow, then its just wiring... :/
  13. C

    srt-10 conversion?

    Can anyone give me any specific measurements/details on what the difference is between the srt-10 and the 4th gen 1500 spindle and upper control arms? It almost looks like the srt-10 spindle is shorter, which would work better for lowered suspension.. Did the srt-10s also come with aluminum...
  14. C

    Nitrous Install Pics

    Matt, where did you get the TPS signal for the progressive controller? I'm trying to find the best place to get the signal so I don't have to install a sensor under the pedal..
  15. C

    Nitrous Install info, parts list, jetting charts, tuning help

    I'd like to run a progressive controller to maximize my options. Where is the best place to get a TPS reading for the controller?
  16. C

    The Dubstep Shep R/T Build

    How would getting a custom spindle compare to redoing the arms on the front suspension? I have an inquiry with MMW on a custom spindle to get our geometry back to stock with a 2-3" drop, fix the bump steer and allow the srt-10 brakes to mount up.. Any chance there would be enough interest to...
  17. C

    light weight drive shafts?

    Any idea if this info applies to an 8 speed? Would be nice to go to a one piece carbon driveshaft as no one seems to be willing to make anything similar to the stock two piece aluminum shaft.
  18. C

    Bumper Replacement Question

    I have a metal non sport bumper and would love to trade.. 2014 ram 1500 traesman. No dents or visible scratches. I guess we would have to trade bumper and grill as I have a different grill and bumper..
  19. C

    HRE Wheels

    The factory 20-22 wheels are around 40#? My current wheels are 33, the hre wheels are 25...
  20. C

    HRE Wheels

    I'm looking for a new set of wheels. I really like the 5 spoke 20" wheels, but they are expensive.. Does anyone know of any similar comparable alternatives, or a dealer who will give a decent discount? 1999 Ford Lightning - Project Stealth Fighter: Part 1 - Truckin Magazine
  21. C

    WTB: 2" rear drop 15' rcsb 2wd

    I have a set off of my '14 1500 2wd regular cab from Moe's Performance. Should have about 5k miles on them. New was $230, so $150? 541-531-3977 cking769@yahoo
  22. C

    OEM 4 Button AUX Switch Panel

    Has anyone used the aux switches to activate nitrous or a bottle heater? Is it possible to do, or is it better to use a dedicated nitrous panel?

Latest posts

Members online

Total: 589 (members: 19, guests: 570)
Robots: 1,055

Forum statistics

Threads
196,199
Posts
2,878,961
Members
157,322
Latest member
BillsRam

Share this page

Top