Search results

  1. RLM5150

    Engine fan running ALOT

    I had that issue intermittently. Really annoyed me last year on a trip to Colorado. Haven't had it happen very often since.
  2. RLM5150

    2500 6.4L Exhaust Options

    I have had the Solo Performance MR400 on for 3 weeks and have driven about 1500 miles since then. I love it.
  3. RLM5150

    6.4L Hemi Exhaust

    I got the Solo Performance MR400 last week and it was installed on Friday. I am very happy with it. Only a little noisy in the cab when I was doing around 65-70 on the interstate. Have not noticed noise at same rpm in lower gears around town. Not really noticeable at 75-80. Loving how it...
  4. RLM5150

    What did you do with your 4th Gen this week?

    I received my Solo Performance MR400 yesterday. Was installed this morning. Love it so far. I am looking forward to a 350 mile road trip tomorrow.
  5. RLM5150

    Rear shock removal on a 2500

    I haven't replaced my rears shocks yet, but have some 5100's on order and will be doing this shortly. I'm thinking a nut splitter should help make this easier. For those that have replaced the rear shocks, did you need to remove the wheel well liner for access, or just come in from the...
  6. RLM5150

    18 MPG

    I did miss your point. I thought the discussion was about the accuracy in calculating mpg by hand vs what the EVIC shows.
  7. RLM5150

    18 MPG

    Unless you do the math wrong I don't know how that is possible.
  8. RLM5150

    What did you do with your 4th Gen this week?

    Well, it was a 10' roll. Placing a strip the entire width of the tail gate across the center made a good improvement.
  9. RLM5150

    What did you do with your 4th Gen this week?

    I bought some 3M velcro and cleaned up the loose areas of my BedRug on the tailgate. The two strips it came with just didn't keep it how I liked. Added several strips and it now lays how it should. That is the only thing about the BedRug I didn't like. Now, it's fixed!
  10. RLM5150

    What did you do with your 4th Gen this week?

    I finally got new tires. After 40K, the stock Firestones were getting pretty hard with so little tread left. Kept the stock size and went with Nitto G2's. Very happy with them so far but have only put on 200 miles.
  11. RLM5150

    steering damper replacement for 2016

    So I have 40K on my 2016 2500 and am about to replace the shocks. I would like to replace the steering damper while I'm at it. I was planning on getting Bilsteins. I can't see a replacement steering damper for the 2016. I thought I had seen discussions on this about a year ago but can't...
  12. RLM5150

    front end bounce

    Everything looked good when we inspected last night. When I get some time I will check the weight distribution again. I will measure the front and do any necessary adjustments before getting back on the CAT scale. I expect I will need to add one or two washers to change the head angle. It...
  13. RLM5150

    front end bounce

    Thanks for the reply. I have 40K on the truck now. I have not inspected the suspension, but will take a look tonight. The level on the truck looks good. I am getting new tires installed in a couple hours and the manager is a friend so we will inspect it then.
  14. RLM5150

    front end bounce

    I have an occasional issue when towing my travel trailer. It's 35 ft, about 8000 lbs. I am using a 10k/1000 e2 WDH. When I first set it up 2 years ago I did get on the scales. It has towed quite well. The issue is on certain concrete highways - interstates usually - with frustrating...
  15. RLM5150

    Fastway e2

    How long is the trailer? For that light of weight you probably could get by without it, but having the sway control is nice. The longer the trailer the more you will want the sway control. Looks like you have a 1500? I would probably get it myself. yes, you can handle the 500 pound tongue...
  16. RLM5150

    manually select gears?

    Just to add what others have posted, you won't be able to "manually shift" per se. You can force it to downshift by pressing "-", but you cannot force it to upshift. Whatever gear you select will be the top gear if will use, but you are not in control of when it shift to that top gear.
  17. RLM5150

    6.4 MDS annoying?

    I haven't noticed any vibration. I have a 2016 with 33,000 miles.
  18. RLM5150

    Anyone know why flexfuel is even worth to use ?

    I see a about a 10% loss in mileage just running E10. E85 is not good for efficiency.
  19. RLM5150

    anyone found 6 ply 18" tires to run on a 2500

    Good luck getting a tire shop to put 6 ply tires on your truck. I don't think any of them want that liability. I think doing that would be foolish.
  20. RLM5150

    6.4 owners....

    Odd, I haven't had this issue with my 2016 2500. Now, my 2012 1500 did that. I hated the trans tuning enough that I bought a Hemifever tuner.
  21. RLM5150

    Campers and Towing

    I am using a Fastway e2 WDH. I've been very happy with it. 1000 lb round bars Truck only 3600 front axle 2980 drive axle With trailer and WDH connected 3320 front axle 4080 rear axle 7040 trailer
  22. RLM5150

    Campers and Towing

    It won't be the weight of the Outback that's a problem, it's the tongue weight. Unless you go alone, you will be over on your payload capacity. I have an Outback 298RE and love it. I had a 1500 when I bought it. It handled the weight well enough. Got on the CAT scales and was 300 pounds...
  23. RLM5150

    5.7 Hemi Front Axle Weight

    I'm guessing you mean that 99.5% don't tow anything. I don't know what that percentage is. I will argue that most people that tow a travel trailer should get weighed. Many of them would be very surprised at the results.
  24. RLM5150

    update pcm = no TPMS light :)

    Unless they lowered the threshold this doesn't really make sense. At what pressure will the light come on now? Or will it?
  25. RLM5150

    HD Tire Pressure Monitoring System Reset

    I can't recall exactly what the error language was, but it was along the line of "Invalid PIN", or "PIN not valid for this vehicle".

Latest posts

Staff online

Members online

Total: 711 (members: 36, guests: 675)
Robots: 1,199

Forum statistics

Threads
195,921
Posts
2,875,836
Members
156,901
Latest member
SeanD

Share this page

Top