Search results

  1. grumpygirl

    Hooke Road Bumper ???

    I bought these and just spliced them in to the original wiring.
  2. grumpygirl

    A/c Clutch burning up

    Read my experience a couple years ago. I list PN I used to fix it. https://www.ramforum.com/threads/a-c-clutch-melted.166012/#post-2389613
  3. grumpygirl

    Wife got a new Truck last week

    I de-chromed mine with Plasti dip. Bumpers, badges and grill. The only thing left is the handles and I may just order painted to match ones.
  4. grumpygirl

    New from Las Vegas

    Welcome.
  5. grumpygirl

    Aftermarket Off Road Bumpers

    check Hooke Road bought my set from there (front/rear/roof rack) they come with lights preinstalled. you do have to bolt them together.
  6. grumpygirl

    Hooke Road Bumper ???

    just found this thread. i purchased the three piece set for my 16 Ram big Horn, front, rear and rack was $1300 delivered. bumper lights are preinstalled. i added the 20' light bar.
  7. grumpygirl

    Using cargo camera inputs for front camera?

    Mod completed. Cant wait to use it on the trails.
  8. grumpygirl

    Using cargo camera inputs for front camera?

    Getting ready to do this mod to use the cargo cam input for a front bumper break over camera when offroading. Is there a way to keep the camera on all the time so I don’t have to constantly turn it back on after 10-15 sec.?
  9. grumpygirl

    Intermittent Cruise Control Button Panel Not Working

    yep had the same issue on my '16. i would just roll my thumb over all the buttons til it popped up saying cruise ready on the dash. got it replaced by the dealer under my extended warranty.
  10. grumpygirl

    What is this connector for?

    maybe the airflow louvers, if you dont have them installed
  11. grumpygirl

    Lightbar behind grill.

    dont really notice too much of a difference. although i did take out the factory grill inserts and made my own.
  12. grumpygirl

    2015 Dodge Ram 1500 Bighorn will not start

    try re syncing your key FOD to the truck. thats what i did to fix this same issue.
  13. grumpygirl

    Door speakers

    i replaced both my front and rear speakers with these. enough bass to rattle the mirrors. https://www.amazon.com/Infinity-Reference-9633IX-3-way-Speakers/dp/B07B8TVMPZ/ref=sr_1_1?dchild=1&keywords=Infinity+REF-9623ix+300W&qid=1616196127&sr=8-1
  14. grumpygirl

    cargo bed camera

    I have a camper shell on my '16 Bighorn so no need for a cargo cam, but would it be possible to set this up for a front grill cam?
  15. grumpygirl

    Leveling Kit Decision

    That’s a pretty good theory. I mean it was hot enough this summer that my A/C clutch melted.( I made a thread about it)
  16. grumpygirl

    Leveling Kit Decision

    Fender liner theory seemed plausible so I went and checked. Plenty of clearance, sticker oriented per instructions and it’s only the back side of the boots. The front side is still intact. It’s not that big of deal to me just what I’ve observed since I’ve had them.
  17. grumpygirl

    Leveling Kit Decision

    I would guess some manufacturing cost saving initiative. They seem a lot softer than my Rancho 5000 I put on my Rodeo.
  18. grumpygirl

    Leveling Kit Decision

    This was after maybe three rides. The boots came pre installed on the shocks,zip tied and everything. Here they are fully extended before install, so I’m pretty sure I didn’t over extend them.
  19. grumpygirl

    Leveling Kit Decision

    This is my current set-up. Didn’t want to do a full blown lift kit. Got it on sale over the summer. Payed $800, spent $40 on a spring commperor from Harbourfreight and changed them out over a weekend. My only complaint is the rear shock boots are kind of thin and didn’t hold up very long on the...
  20. grumpygirl

    Bilstein 6112

    mine are set at 2.4 with factory UCAs.
  21. grumpygirl

    A/C clutch melted !?!

    hows your A/C coming?
  22. grumpygirl

    A/C clutch melted !?!

    heres the part kit number you need 68232392AB. there are multiple dealers on line that have it listed. my local dealer wanted $350, thats why i ordered it online. its pretty easy to change, i pulled the fan shroud out to give myself plenty of room. just need a 8 or 10 mm socket , a pair of...
  23. grumpygirl

    High Beam Problems

    this one is a stumper. my first thought would be to dig into the wiring in the steering column. make sure the switch contacts are making connection, check the harness connectors at the bottom to make sure they are seated and locked. i havent messed with ALfA so im not sure of its capabilities.
  24. grumpygirl

    A/C clutch melted !?!

    i ended up ordering it from a dealer in florida. it took some digging but i was able to find a part number for the clutch assembly. ill see if i can find mine order form and send you the info.
  25. grumpygirl

    High Beam Problems

    Tried looking up the schematic in my Haynes manual but they show every light except the head lights.

Latest posts

Members online

Total: 389 (members: 9, guests: 380)
Robots: 1,204

Forum statistics

Threads
195,624
Posts
2,872,661
Members
156,454
Latest member
Goodie1990

Share this page

Top