Search results

  1. H

    Gen 4 Hemi swap in a 2004 Ram

    I've had my 04 Ram going on 6 years now, and love it. Issue being the motor died on me (locked up on the interstate; cant turn crank damper). TIME FOR STROKER KIT!!! But I was wondering how big of an issue it would be to put one of the new (09+) Hemi's in it? Head flow is ridiculous and I can...
  2. H

    new bumper

    So against every recommendation I could find, I bought a duraflex srt look front bumper. After two shops said they couldn't put it on, I tried myself and broke the damn thing. Was looking to see if anybody had any recommendations on different ones? Would the AIT bumper be any better...
  3. H

    4 link?

    So a triangulated 4 link kit is like 400 bucks. 2 coil overs are around 800. You get a whole lot more adjustability and eliminate spring wrap right? Ride quality should drastically improve, and cornering as well? Other than a slightly higher cost and a little more playing in the shop, anybody...
  4. H

    Rear drop

    Has anybody gotten rid of the leafs in the back and done a 4 bar and coil overs? Thinking about a 4" for the front and a 3" out back just to keep that stance.
  5. H

    Starting issues

    Ecu connection over on the passenger side was loose. Pure luck I found it. Appriciate it though!
  6. H

    Starting issues

    Apparently something is wrong with my baby, cause she's being a b***h! 04 ram with the 5.7, and right around 140k on the clock. Went to turn it on today, and not a dang thing. Starter didn't click, and the fuel pump didn't prime. Hooked up some jumper cables, same thing. All my gauges read zero...
  7. H

    Another Mod to add to the collection.

    You can get OD pulleys for all the others that will bring them back to the normal working rpm if you're that worried about it.
  8. H

    What's this?

    Thanks!
  9. H

    What's this?

    Can somebody tell me what this is, and why it was about to fall off?
  10. H

    Beauty and the Beast .......

    fonzyn, I want the 392 and 6 speed in my frickin truck!
  11. H

    Color matched paint and a dremel!

    I don't use the console for anything. Still flips up if somebody had to sit there. Peru much just bored with an extra pair of speakers layin around.
  12. H

    Color matched paint and a dremel!

    I'm a biggg music guy, and hate how little room I have to hide speakers and whatnot. So I put a set of 6x9's in my center console. Took a good 3 hours to get it right, but they're in! This weekends project is to pull the old cushion and vinal off, and put a plexiglass cover on top. Just have a...
  13. H

    Loss of power after custom intake?

    I love my volant :P it will work ALOT better with a tuner tho.
  14. H

    Seafoam?

    I normally use it every 10k or so. works well as injector cleaner and it always seems to beak alot of stuff up if you pour some in the crank case.
  15. H

    Finshed changing the spark plugs. Wow what a difference

    Thanks to my giant frickin hands, I had a blasty blast. Should clean your TB while you're around that
  16. H

    Exhaust Frustration

    Depends on how good you are at welding ;)
  17. H

    Finshed changing the spark plugs. Wow what a difference

    I'm all about DIY! The ones under the master cylinder were fun huh? ;)
  18. H

    Hemi Straight pipe question

    On a stock cam, the back pressure from the cats, muffler, and the terrible frickin stock headers is accounted for in the grind of the cam. Getting rid of any of that will effect your engine minimally, but just getting rid of the muffler won't do much.
  19. H

    Typical gains with bolt ons?

    Ill go look em up. Stroker is gonna get started here in a few, but I need to get the heads first. No sense specing out a cam for head flow I dont have :P
  20. H

    Typical gains with bolt ons?

    I just cant get my head around "big valve" heads being that small. Who did you get the ones for your stroker from?
  21. H

    Typical gains with bolt ons?

    When you say big valve heads, what size valves were you running? Because to me, it seems like this motor is severely undervalved
  22. H

    Truck is throwing the "exhaust leak" code;

    Hopefully lol but i'm more liking forward to havin a project to work on haha
  23. H

    Truck is throwing the "exhaust leak" code;

    Got the stainless for the flanges for 55 bucks, 15 for the gaskets, $110 for the pipe and collectors. I want to make them tri-y's (4 primaries merge into 2, then those 2 merge into 1), I've had good luck with them in the past. For that, I needed 4 collectors that were 2-1, at $22 apiece. But for...
  24. H

    Truck is throwing the "exhaust leak" code;

    Got new gaskets in today, and picked up some plate steel for the flanges a few days ago. Hopefully have those cut out by the time all the pipe comes in next week! Going to be about a month before I can start piecing them together; I have to work like the next 19 days strait or somethin crazy...
  25. H

    plug wire spaghetti

    I really hate that huge tangle of wires up on top of my intake manifold, what all can I do to fix that

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,573 (members: 59, guests: 1,514)
Robots: 1,597

Forum statistics

Threads
195,879
Posts
2,875,395
Members
156,858
Latest member
GregH

Share this page

Top