Search results

  1. Kyle_14_Ram_1500

    Modifystreet headlight build

    Ok. Thanks for clarifying for me. I was thinking that’s what would have to be done to fix it. I like your set up. If I ever find time between work, my side jobs and the kids, I’ll probably take a stab at fixing what I have or modding them like you did. Have a good one man. Sent from my iPhone...
  2. Kyle_14_Ram_1500

    Modifystreet headlight build

    Ok I get the vertical alignment for aiming the head lights. That’s not the issue. Right now the cutoff for the low beams is rolled/canted/rotated, whatever you want to call it, ever so slightly so the cut off is not level when my truck is on level ground. I know step is there and is supposed to...
  3. Kyle_14_Ram_1500

    Modifystreet headlight build

    Hey 1500ram12, I know this is an old thread but I figured that you might know the answer to my question concerning the alpharex lights. I currently have the same version you modified, installed about about a year and a half ago. I noticed at the time that my low beam cut offs on either one or...
  4. Kyle_14_Ram_1500

    AlfaOBD

    I saw that in another thread in the search I did. I’m keeping this in my back pocket. I let my buddy know this as well. Thanks! Sent from my iPhone using Tapatalk
  5. Kyle_14_Ram_1500

    AlfaOBD

    Yes I missed it some how. [emoji2357] I was using the website version instead of tapatalk. I think it’s a little harder to find things due to the formatting. At least it is for me. Thank you. Sent from my iPhone using Tapatalk
  6. Kyle_14_Ram_1500

    AlfaOBD

    Thanks must have missed it. Sent from my iPhone using Tapatalk
  7. Kyle_14_Ram_1500

    AlfaOBD

    Hey guys. I’m trying to help some one out with getting their skim pin code from the dealership. I could have swore that there were some recommendations on the first post of this thread with tips for dealing with a dealership that is not willing to give you the skim code, but upon looking, I...
  8. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Basically what I’m thinking. I’m keeping an eye on my seal but so far so good. Looks like the auto parts I checked had them in stock so should be able to get one if needed easily. Sent from my iPhone using Tapatalk
  9. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    So yesterday, after having gotten my new tires the previous day, on the way into work I heard a “light metal rubbing” noise kind of like a brake rubbing noise. Got home after work and checked my driver side out more. Turns out my driver side wheel bearing failed. So last night, I replaced the...
  10. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    It was on a jack in this video but I am getting similar play and sound when it is on the ground as well. The passenger made some noise when jacked up but not near the movement or noise. I’ve heard some popping from that side in the last 6 months during tight turns that I feared was CV joints. I...
  11. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Awesome! Exactly what I wanted to know. Not leaking currently so sounds like the seal is still good. From what I have seen online, it’s best to disconnect the upper ball joint when replacing CV axles on these trucks. I did it that way with my S-10 when it needed CV axles. I have a ball joint...
  12. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    So am I correct to assume that pulling the intermediate shaft would also drain the differential fluid? Is there a seal there that needs replacing? Or is it isolated from the actual drive gearing in the diff? Thanks for the feed back! Sent from my iPhone using Tapatalk
  13. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Hey everyone, hope you all having a good day. I have a 2014 Ram 1500 4x4 with 90,000 miles and noticed a rattle going over bumps coming from the front drivers side. Got underneath and looked at the CV shaft and this is what I found: Figuring its time to replace the CV shaft and stub shaft. Do...
  14. Kyle_14_Ram_1500

    AlfaOBD

    No dice on the a range parameter, at least for my truck. Let me know if you have any luck. I may reach out to AlfaOBD directly to see if they are aware of any issues and what else can be tried.
  15. Kyle_14_Ram_1500

    AlfaOBD

    Any one know that the Cluster-Fuel tank 2 calibration is for? I’m assuming it’s for a duel tank set up? Also what is E stop datum for fuel volt? Both the cluster fuel tank 1 and 2 have that parameter in the drop down. It has selection from 0 to 63. Sent from my iPhone using Tapatalk
  16. Kyle_14_Ram_1500

    AlfaOBD

    I’ll mess with it a little more tonight too. My build sheet and window sticker both say I have the optional 32 gallon tank and I only knew about a recalibration opportunity from the U07 recall for the 8 speed rotary switch auto park feature. I heard it included a fuel recalibration for the 32...
  17. Kyle_14_Ram_1500

    AlfaOBD

    Did you only trouble with the full value or the others as well? I’m wondering if there is a range parameter somewhere in the bcm. Sent from my iPhone using Tapatalk
  18. Kyle_14_Ram_1500

    AlfaOBD

    Weird. It lets me change the liters, empty, LFW but not the full. Keeps reverting back to 91%. Does truck need to sleep for a while? Sent from my iPhone using Tapatalk
  19. Kyle_14_Ram_1500

    AlfaOBD

    So basically FCA could have done this long ago but let us think that we have the smaller tank by entering the cluster settings as 91, 16 and 23% for full, empty, and LFW respectively? That’s crap if they did. Sent from my iPhone using Tapatalk
  20. Kyle_14_Ram_1500

    AlfaOBD

    Why does the empty percentage in the procedure say to only change the empty to 5% and not adjust LFW, but the cluster config say 2% for empty and 8% for LFW? Sent from my iPhone using Tapatalk
  21. Kyle_14_Ram_1500

    AlfaOBD

    Oh does this change the range until empty in the EVIC as well?
  22. Kyle_14_Ram_1500

    AlfaOBD

    Cool. Just what I needed to know. I'll give it ago. Thanks again 1500ram12. This forum and its members rock!!!
  23. Kyle_14_Ram_1500

    AlfaOBD

    Did you have the U07 recall (auto park) or the U53 (passive restraint) done? I'm thinking I am in the clear to perform since I didn't get the auto park done, but did have the passive restraint done. I just don't want to have a brick for a truck. Thoughts? I'm new at messing with BCM settings so...
  24. Kyle_14_Ram_1500

    AlfaOBD

    A couple questions. First, is any one aware of a way to have the fog lights and the park lights on for the DRLs? I just installed some aftermarket head light assemblies and the park lights aren't as bright as I'd like them. Eventually I am going rewire them as switch backs and to be brighter...
  25. Kyle_14_Ram_1500

    AlfaOBD

    One more question, my wife drives a 2010 Chrysler T&C. Can I use this app and adapter to see if I can turn her DRLs on using a similar process to what I just did? Or would that mess with anything I have done on the tablet for my truck? How many compatible vehicles can I use this on? Thank you...

Latest posts

Members online

... and 11 more.
Total: 1,053 (members: 61, guests: 992)
Robots: 1,713

Forum statistics

Threads
195,699
Posts
2,873,472
Members
156,578
Latest member
zallz

Share this page

Top