2014 Ram 1500 3.6 L Pentastar EGR Valve, I'm having no luck finding any information regarding this.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

garycarrick

Junior Member
Joined
Aug 8, 2025
Posts
23
Reaction score
22
Location
Winnipeg
Ram Year
2014
Engine
3.6
Dodge parts could not tell me anything. Does the 2014 1500 3.6 L HAVE an EGR valve? Dodge has no listing. Is it integrated into something else?
 

Jeepwalker

Senior Member
Joined
Sep 8, 2017
Posts
4,287
Reaction score
5,487
Location
WI
Ram Year
2012 Reg Cab, 4x4
Engine
5.7 Hemi
I see what you mean, I did some searching and I get different reports. Pretty sure there is one. Per a search THIS one came up. Not cheap.

But I can't find where it's located. I have the same engine in a similar yr Jeep. I'm not putting my eye on it either (unless it's under the intake). ...

I better let someone who owns a 2014 chime in.

:happy160:
 
Last edited:

HuskerRam

Senior Member
Air Force
Joined
Apr 14, 2013
Posts
440
Reaction score
810
Location
Tucson, AZ
Ram Year
2022
Engine
3.0 Ecodiesel
I believe EGRs didn't find their way into the 3.6L Pentastar until around 2016-2017. If you're running a 2014, you won't have one. Did you get a code for an EGR issue?
 
OP
OP
G

garycarrick

Junior Member
Joined
Aug 8, 2025
Posts
23
Reaction score
22
Location
Winnipeg
Ram Year
2014
Engine
3.6
Perfect, thanks. just been chasing random weirdness since I had it in to dodge to repair an oil cooler leak last winter. $1200! I changed the plugs recently and found that two of the upper intake bolts were stripped.. (wont torque or tighten properly) so that's the where I'm getting the p2173, p0507 i suspect. All the hoses and connections look good. They also left off the mounting nuts that secure the upper intake, front and back. Good luck getting them to acknowledge it. Had to order a new lower intake to correct the stripped holes so i can fasten it all back together properly. Still under extended warranty, but its funny how all the plastic bits that bolt on aren't covered.
 
Last edited:
OP
OP
G

garycarrick

Junior Member
Joined
Aug 8, 2025
Posts
23
Reaction score
22
Location
Winnipeg
Ram Year
2014
Engine
3.6
Finally found my p2173, p0507 that at its worst cause transmission codes and limp mode. Aside from the stripped upper intake bolts at the back, I had severely worn fuel injector o rings on the most rear injector. Replaced the lower intake and all injector o rings and now seems to be running well.
 

Latest posts

Forum statistics

Threads
211,416
Posts
3,066,390
Members
171,877
Latest member
Johnnguyen6596
Back
Top