2018 ram 2500 fog lights and remote start

[JimmyJam26]

hi all,

I have been looking though the forums and have found two great write up on doing the remote start and factory fog lights I just wanted to make sure that the 2018's have the same pin outs as listed in these write ups.

again it is for a 2018 2500

Remote start would be pin 1 & 2

Fog lights would be pin 23 & 24

links to the posts

https://www.ramforum.com/threads/ho..._-yjfaO3tUQ4rkCCjGFf2vR25cX9FqwcUsRYAi4YuaDw8

https://www.ramforum.com/threads/diy-add-2013-2018-oem-foglight-wiring.105556/

thanks everyone

 

[CincyCuda68]

hi all,

I have been looking though the forums and have found two great write up on doing the remote start and factory fog lights I just wanted to make sure that the 2018's have the same pin outs as listed in these write ups.

again it is for a 2018 2500

Remote start would be pin 1 & 2

Fog lights would be pin 23 & 24

links to the posts

https://www.ramforum.com/threads/ho..._-yjfaO3tUQ4rkCCjGFf2vR25cX9FqwcUsRYAi4YuaDw8

https://www.ramforum.com/threads/diy-add-2013-2018-oem-foglight-wiring.105556/

thanks everyone

I’ve done both mods and that would be correct! Good luck, you will love having both of those.

 

[JimmyJam26]

I’ve done both mods and that would be correct! Good luck, you will love having both of those.

Thank you

 

[TODDER]

Are the pin-outs the same for 2013-2018 when adding the extension? Sent my quote request for the extension harnes and it is all I need to finish this install. New Bumper- New fogs - new OEM wiring harness - new dash switch - OBDlink MX and alphaOBD.