50" LED light bar

[ramtruck4life]

Hey guys iv been wanting this light bar for a while now and I just found someone that is selling them for 550$ they might not be bullet proof like the rigid industries ones but at lest they are affordable!! BUT I'm having a hard time finding mount for it on the roof..

Here's a pictures of it on a 2500



This is a Nfab mount for tundras


Let me know what you guys think about this setup on are trucks and if you ever seen them before on a 1500 ram

 

[BAILEY1]

That looks awesome! I've only seen them attached to roof racks on the Ram 1500. I wonder if the mounts for the Tundra would work on our trucks.

 

[pd298]

I think it will be cool if you can get it to work.. I wouldnt want to drill into my roof though! Ive been kicking around the idea of getting rid of my hella 700's on my light bar and going with like a 30" led light bar.

 

[reefguy89]

ive been looking for a long time for these mounts but nobody makes them for us. it gonna have to be custom from what i have seen.

 

[reefguy89]

i just emailed nfab about this so we will see what they say. but those mounts they make for the yota are like 180 bucks on there site.

 

[99RamSport360]

Hey guys iv been wanting this light bar for a while now and I just found someone that is selling them for 550$ they might not be bullet proof like the rigid industries ones but at lest they are affordable!! BUT I'm having a hard time finding mount for it on the roof..

Here's a pictures of it on a 2500
View attachment 10726
View attachment 10727

This is a Nfab mount for tundras
View attachment 10728

Let me know what you guys think about this setup on are trucks and if you ever seen them before on a 1500 ram

Would you be willing to tell us where you are getting this bar?

 

[pd298]

I'm ready to see an update..........

 

[fastNugly]

Yea, those mounts will have to be custom made.
Many of them do not drill into the roof, rather they use the existing bolts in your door jam/front side mount roof handles.
There are bolts there that are re used to hold these down.
This is from what I have heard as this is under consideration as well for me.

 

[reefguy89]

Yea, those mounts will have to be custom made.
Many of them do not drill into the roof, rather they use the existing bolts in your door jam/front side mount roof handles.
There are bolts there that are re used to hold these down.
This is from what I have heard as this is under consideration as well for me.

actually the nfab ones and a few other brands mainly geared for raptors and tundras you have to drill thru the roof. There are a couple that i have seen for chevy that bolt into the door jamb. Nfab has still not emailed me back about these thought but they want almost $170 for the brackets.

 

[fastNugly]

actually the nfab ones and a few other brands mainly geared for raptors and tundras you have to drill thru the roof. There are a couple that i have seen for chevy that bolt into the door jamb. Nfab has still not emailed me back about these thought but they want almost $170 for the brackets.

Damn no way!
Well the company I'm dealing with for my bumper can make this and it requires zero drilling. However they won't make it unless you buy a rigid lightbar from them to offset the cost to make them which they said is a losing cause

 

[pd298]

Yeah I'm sure it would offset the cost. What is a 50 inch rigid run, 3-4000?

 

[fastNugly]

Yeah I'm sure it would offset the cost. What is a 50 inch rigid run, 3-4000?

40" retails between $1200-$1300 depending on where. So Im guessing the 50" is prob in the neighborhood of $1500

 

[reefguy89]

Damn no way!
Well the company I'm dealing with for my bumper can make this and it requires zero drilling. However they won't make it unless you buy a rigid lightbar from them to offset the cost to make them which they said is a losing cause

rigid light bars are over rated and over priced. Who makin the bumper add? Im not sure how they would require no drilling even if you put the mounts in the door jamb there are only like 2 small screws by the windshield. Well atleast on the 3rd gen. And i would not trust those 2 screws to hold a light bar over my windshield.

 

[reefguy89]

Yeah I'm sure it would offset the cost. What is a 50 inch rigid run, 3-4000?

yea the 50'' e series are around 1500 but can be found for a little lower the sr are around 1100.

 

[fastNugly]

rigid light bars are over rated and over priced. Who makin the bumper add? Im not sure how they would require no drilling even if you put the mounts in the door jamb there are only like 2 small screws by the windshield. Well atleast on the 3rd gen. And i would not trust those 2 screws to hold a light bar over my windshield.

I feel the same....but they do offer a lifetime, no hassle warranty on their product and you pay for what you get.
Not knocking other brands or no name brands.
Its all it what you need and want and can afford

 

[reefguy89]

i have found a company that makes the brackets for are trucks they bolt in the door jamb and are 67 bucks. the company is cjc offroad you have to call to order them thought right now as they havent gotten them on there site yet. you can check them out on facebook to see pics.

 

[Stangshcky12]

Wish I would have seen this sooner
Like he said cjc makes them as well as 30" mounts for between the row hooks of 2500/3500

 

[fastNugly]

i have found a company that makes the brackets for are trucks they bolt in the door jamb and are 67 bucks. the company is cjc offroad you have to call to order them thought right now as they havent gotten them on there site yet. you can check them out on facebook to see pics.

Thanks Joe for this!

Wish I would have seen this sooner
Like he said cjc makes them as well as 30" mounts for between the row hooks of 2500/3500

Any idea if those brackets for the 30" will work for a 40" if adjusted or flipped around?

 

[Musclemckeester]

I'd love to run a 50" across the roof and a 30-40" on my light bar.......

The white truck in the first post was at SEMA last year.



And I also saw this one, but to me the bracket is way too high. You can also see this guy has one in between the tow hooks too.

 

[reefguy89]

Thanks Joe for this!



Any idea if those brackets for the 30" will work for a 40" if adjusted or flipped around?

you dont need a bracket to mount a 30''light bar. i mounted mine with no bracket.