attention 3rd gen hemi guys

[Davy120]

02-08 only guys please preferably 03-05, if you live somewhere cold and you have a few minutes tonight if you could go start your truck and take a picture of your gauges so i can see where all the needles sit im having some issues right now hahaha and i need a good reference please and thank you. if you could take like two pics, one of the left three gauges kinda close up and one of the right three guages kinda close up. thank you guys so much in advance.

edit: please do not let your truck warm up at all i need it be right at cold start since its like 35 ish here thanks again

 

[PCA4208]

It's about 30 degrees out tonight. And it gets to like 27 in the mornings. I can tell you where all my gauges sit. Without a pic.

Tach- begins at 1000 then steadily drops as engine warms
Voltage- sits around halfway between normal and high (I have a new battery though)
Water- below the coldest range on the gauge
Oil pressure- sits in the normal range constantly, but I don't believe it

 

[03MopaRamman]

Whats the problem?

 

[Davy120]

Removed all my needles and they dont sit right now, even tho I marked where they needed to go
Did this

A modder is never truly done, he is merely delayed!

 

[PCA4208]

Well I can say that the voltage is completely off, but the others look fine. I'm going to leave my house in about an hour, like 8:30. I can take pics of my gauges if you'd like.

 

[KGBIGCOUNTRY]

RPM is low to

 

[OilCityOperator]

Woah man those gauges looks sweet!!!

Good luck with your needles