FINALLY!! 2" HBS LEVEL 1.25" Body lift and 20 x 10 w/ 295 60 20s!! BOOM!!

[monettejb]

Looks great, looks beefy, more than i thought with 295's.
Im considering 305/55R20 on 20x9 0mm offset. Not sure how its gonna look though

Depends on your lift or level? I don't like the 305 because basically it's same height as the stock. 33" tire.

 

[monettejb]

can you post a pic of the exhaust tips? did the 1.25" make them look much lower??

As requested

 

[fastNugly]

monettejb,
does not look that bad at all.
Have you tried to loosen the bolt holding them and tapping them upwards slightly and retightening them to have them sit closer to the cutout?
Either way, it is not bad at all....much better than how the 3" makes them look

 

[Marc1982443]

any issues with rubbing with tire and wheel combo?

 

[johnnysart]

Looks good but ummm we need more pic's.

 

[monettejb]

monettejb,
does not look that bad at all.
Have you tried to loosen the bolt holding them and tapping them upwards slightly and retightening them to have them sit closer to the cutout?
Either way, it is not bad at all....much better than how the 3" makes them look

I looked because someone said they are adjustable. To me they do not look adjustable. The connector is welded around my pipe and mounts into a "foam" absorber from what I can tell.

 

[monettejb]

Looks good but ummm we need more pic's.

I agree as soon as it slows down raining here, Im going to clean it professionally and hire a photographer. Just trying to settle on a location. Goin to the beach in a couple of weeks so may do it then.

 

[monettejb]

any issues with rubbing with tire and wheel combo?

no issues what so ever.

 

[johnnysart]

I agree as soon as it slows down raining here, Im going to clean it professionally and hire a photographer. Just trying to settle on a location. Goin to the beach in a couple of weeks so may do it then.

Looking forward to the pic's. I love the color and the complete look of it

Next mod might be to get yourself a good slr or ps(point and shoot) camera.

 

[fastNugly]

I looked because someone said they are adjustable. To me they do not look adjustable. The connector is welded around my pipe and mounts into a "foam" absorber from what I can tell.

Yea. It's not on the tip or behind the tip.
Look further down the pipe and you'll see where there are clamps (one on either side)
Loosen and tap the pipe upwards and once in place re tighten and then they will be tucked

 

[monettejb]

Yea. It's not on the tip or behind the tip.
Look further down the pipe and you'll see where there are clamps (one on either side)
Loosen and tap the pipe upwards and once in place re tighten and then they will be tucked

Sweet ill give that a try!!!!!

 

[Slmileyjr]

I'm running this same setup with 20x9 factory offset wheels and I had to put 1/4" spacers in the front to prevent rubbing.

 

[Trupiano]

Looks sharp man!

 

[fastNugly]

Sweet ill give that a try!!!!!

Yes sir and keep us posted!

We still need pics of your truck

LOL

 

[Diminus]

Nice rig man I did a similar lift just with a rear spacer to get a rake in the truck, but alot of people don't like rake in their rigs, to each their own, nice wheels!

 

[Hammer75]

How has your MPG and performance been since adding this stuff? By the way, looks awesome!!