Laramie gone loco

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

keithlovelace

Junior Member
Joined
Sep 8, 2025
Posts
1
Reaction score
0
Location
Arkansas
Ram Year
04
Engine
5.7
O8/0908/2025
Got an 04 Laramie 5.7 Hemi that’s suddenly got several things acting screwy- ie brake and marker lights stay on after vehicle is turned off, hard to start - like it’s not getting enough fuel but fuel pump is working just fine, and now it won’t shift past third gear-fourth gear won’t engage.
Motor has 90k actual. All of this started when front end was rebuilt about a month ago. My buddy thinks it’s the pcm -I’m not so sure. Anybody else run into a problem like this?
 

ppine

Forester
Joined
Jun 24, 2022
Posts
533
Reaction score
511
Location
Nevada
Ram Year
2022
Engine
6.7 liter diesel
I always found good times in Laramie. It is a university town and lots of great music comes through on the Interstate. The good acts are on their way to somewhere else, so they play on week nights usually. Some great western swing bands bring out the loco in the locals. Watch out for tourons.
 

Marshall

Senior Member
Joined
Apr 17, 2013
Posts
2,253
Reaction score
3,141
Location
Sk, Canada
Ram Year
2014 sport
Engine
5.7 hemi
Load check the battery as well seems to be the first order of business.
put a amp meter on the battery when everthing is turned off.
look at all the wires around the front end check for green wires, check all the connectors.
This crap can cause a drinking problem.
 

mrclean426

Junior Member
Joined
Oct 30, 2020
Posts
15
Reaction score
18
Location
Benton City
Ram Year
2005
Engine
5.9 Cummins
First make sure your battery is good, then make sure the battery terminals are clean and making good contact and alternator is putting out. Then find all your wiring harness ground connections and make sure they are all clean and in good shape. Bad grounds will cause multiple faults and just having your froont end done I suspect shop may not have replaced one properly or moved it or bumped it and it is causing issues. Bad grounds cause multiple faults all over the system
 

Latest posts

Forum statistics

Threads
210,997
Posts
3,060,838
Members
171,039
Latest member
Reticle918
Back
Top