Lowered 4x4 with SRT 10 22x10 wheels

[PMS1969]

Any body with a 4x4 lowered with SRT 22x10 wheels have rubbing issues with Nitto 420 tires? Daily driver / work truck.

 

[PMS1969]

I think I put this in the wrong spot. Is it possible to move it?

 

[16WhiteQC]

Check the lowered section, lots of info there.

From what I understand and remember when I was looking at hellcats with 305/45 420's.

SRT's and Hellcats have the chance to rub the upper control arm with 305's, some even say its close with 285's (depending on the tire). Some also report rubbing the swaybar end at full lock.

Most go with a 1/4" spacer up front, I was looking at 3/8" hubcentric spacers when I was going that direction.

 

[PMS1969]

Had the SRT's with 305/45 420's swapped over when I bought the new truck. They also transferred the 1/4" spacer on all 4. I just want to make sure the tires won't hit fenders when lowered since the tires look flush to the outside of the body.