new mileage milestone.

[02blkram47]

Hit this mark leaving work today.

 

[LB3711]

wow

 

[quietpeen]

that is up there

 

[scott2488]

wow

 

[02blkram47]

2002 = 13700 per/yr. not too bad

 

[NotJesus]

Is that a lot for these trucks?

 

[Bigdaddyii]

Is that a lot for these trucks?

I hope not I have almost 174,000.


Sent from my iPhone using Tapatalk

 

[HemiBabe]

woo wee!!

 

[Track3r]

I hope not I have almost 174,000.


Sent from my iPhone using Tapatalk

I hae 187k right now..... still runs good!

 

[02blkram47]

I'm glad to see some 4.7s out there with mileage.

 

[Mac004]

Congrats. I have 99,536 on the dial now. Will be a couple of weeks until I get it back on the road for the 100K milestone. Have to replace the front hub bearing assemblies, driver side went the other day. I also need to service the diffs, trans, and transfer case fluids.

 

[iSlacker816]

Congrats but so far I win, 194,7xx

 

[bigbadram1500]

That's awesome. Hope mine makes it to that.

 

[Bigdaddyii]

I'll be looking forward to that mileage out of mine as well iSlacker.


Sent from my iPhone using Tapatalk

 

[rph74]

181,000 here as well on my 2008 4.7. They can last!

 

[iSlacker816]

I'll be looking forward to that mileage out of mine as well iSlacker.


Sent from my iPhone using Tapatalk

I'm looking for over 250,000 before I tear her down and build the motor.

 

[Sethjamto]

I had 147,*** on my wife's 4.7 AWD Durango when I recently traded it in on her new Charger. Engine still ran great!

 

[omextreme]

Ill hop in the game. my 2008 4.7 will hit 273,*** by tonight..... Almost trouble free the whole way. No engine issues, no trans issues. Lost a set of bearings in the rear axle and broke 1 rear axle. Replaced front hubs and ac condenser motor.

4 sets of tires, 1 set front hubs, 1 set rear calipers, 3 sets front rotors, 2 sets rear rotors, had drive shaft rebuilt (dealer though the noise i was hearing was drive shaft, it was rear axle bearings so rebuild not necessary) 2 sets shocks, 4 sets front brake pads, 3 sets rear pads, 1 control arm, 2 serpentine belts, and a set of cats...

Now FYI i have had EVERY recommended service done with the exception of fuel injector cleaning done by dodge at factory recommend intervals..

Bought truck new @ 4 miles. so far 273, going for 750k AND i tow a 16x8 cargo trailer regularly @ 5k lbs.....

motor still runs like a champ, no oil burning, no leaks / knocking /pinging or hesitation....

 

[quietpeen]

Wow that is quite a lot of miles. Welcome to rf

 

[02blkram47]

Ill hop in the game. my 2008 4.7 will hit 273,*** by tonight..... Almost trouble free the whole way. No engine issues, no trans issues. Lost a set of bearings in the rear axle and broke 1 rear axle. Replaced front hubs and ac condenser motor.

4 sets of tires, 1 set front hubs, 1 set rear calipers, 3 sets front rotors, 2 sets rear rotors, had drive shaft rebuilt (dealer though the noise i was hearing was drive shaft, it was rear axle bearings so rebuild not necessary) 2 sets shocks, 4 sets front brake pads, 3 sets rear pads, 1 control arm, 2 serpentine belts, and a set of cats...

Now FYI i have had EVERY recommended service done with the exception of fuel injector cleaning done by dodge at factory recommend intervals..

Bought truck new @ 4 miles. so far 273, going for 750k AND i tow a 16x8 cargo trailer regularly @ 5k lbs.....

motor still runs like a champ, no oil burning, no leaks / knocking /pinging or hesitation....

That is awesome. I can only hope for that kind of mileage and luck with repairs. I'm currently going through the truck with repairs now so I'm spending some money but once I'm done I feel like it should last a long time.