Not sure what's wrong with my window

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Cliffordthe6Stick

Junior Member
Joined
Apr 18, 2020
Posts
29
Reaction score
29
Location
South Dakota
Ram Year
2001
Engine
8.0 V10
Hello! I have an 07 1500 and the driver's window is acting finnicky. It tends to roll down fine but when I try to get it back up I have to tap the switch a few times before it works. I'm afraid one day I'll roll it down and it'll cease to roll back up at all. From what I can tell the switch isn't the issue.
I'd appreciate any helpful insight on this. Thanks!
 

moezer

Member
Joined
Jun 26, 2019
Posts
56
Reaction score
16
Location
Calgary
Ram Year
2004
Engine
hemi 5.7
If the switch isn't the issue then it would be the motor for the window is going bad

Sent from my SM-N950W using Tapatalk
 

MikeT

Senior Member
Joined
Jan 28, 2017
Posts
239
Reaction score
111
Location
Chino Valley, AZ
Ram Year
2006
Engine
CTD
Happened to my wife's Dakota on the passenger side, while I was in the passenger seat. Window went down tried to get it to roll back up, nothing. New switch and new motor, not a cheap repair, but works good.

Mike
 

moezer

Member
Joined
Jun 26, 2019
Posts
56
Reaction score
16
Location
Calgary
Ram Year
2004
Engine
hemi 5.7
Good thing these trucks are littered at the junk yard lol

Sent from my SM-N950W using Tapatalk
 

10 Break

Senior Member
Joined
Jul 20, 2018
Posts
137
Reaction score
71
Location
Dayton, OH
Ram Year
2007
Engine
4.7
Good thing these trucks are littered at the junk yard lol

Sent from my SM-N950W using Tapatalk
Not in Dayton Ohio...I went to 3 one day last year and found 1 3rd gen. Thought it was funny that they all had a lot of PT Cruisers
 
OP
OP
Cliffordthe6Stick

Cliffordthe6Stick

Junior Member
Joined
Apr 18, 2020
Posts
29
Reaction score
29
Location
South Dakota
Ram Year
2001
Engine
8.0 V10
The junkyard I'm headed to today has 8 total, 5 of which are 3rd gen. I think the newest one has been there 2 weeks, and it takes no time for all the good stuff to disappear. So, hopefully I can come up with a window motor... Especially one that works o_O
 

moezer

Member
Joined
Jun 26, 2019
Posts
56
Reaction score
16
Location
Calgary
Ram Year
2004
Engine
hemi 5.7
Yeah one time I stumbled on one that wasnt touched lol was nice taking what I needed, my truck can use some breaks and rotors in the front tho

Sent from my SM-N950W using Tapatalk
 

Forum statistics

Threads
210,983
Posts
3,060,690
Members
171,006
Latest member
Steve58
Back
Top