Off-Road Lighting Ideas

[Scotts26]

Hope you didn't have anything planed this weekend because we need pics sir!

Can’t wait until I get them and can get ‘em installed! Looks like my switches won’t ship until the 15th though. Boo.

 

[Trailmaker]

Feast! When I get a new truck I’m doing this.

@Trailmaker step it up man!

I thought I was gonna do this set up again on my power wagon but I will run different color lenses. What you posted checks that box. So I’m entertaining that setup over the ridged setup I did on my Raptor. thanks Peter.

 

[56PW17]

I thought I was gonna do this set up again on my power wagon but I will run different color lenses. What you posted checks that box. So I’m entertaining that setup over the ridged setup I did on my Raptor. thanks Peter.

View attachment 205216

View attachment 205217

I’ve wanted to run the bajas in my 17/18. Might have to pull the trigger. The setup for the 19/20 looks so good with the bezel though. Wish the 18s had something to close the gap of a round light off with.

 

[MikeBrew]

Four sets of rigid lights wired thru a painless block and a factory switch from a 2500. Moved factory fog lights behind grill where I welded a piece of angle iron to make light bar. Rigid DOT approved fogs and driving light in factory bumper cutouts. Driving/flood light bar in front with a spotlight cube in rear bumper. Ram switch had a negative ground(or opposite I forget) so painless wiring talked me thru a rewrite of their fuse box. Those guys are the best. Will hold your hand all the way thru the job. Rule 1 the work should look factory when done.

 

[MikeBrew]

 

[MikeBrew]

 

[MikeBrew]

 

[MikeBrew]

 

[MikeBrew]

 

[MikeBrew]

 

[4airstreamer]

Here’s my set up. Baja Designs fog light mount for the bumper and SDHQ a-pillar mount. Lights are all Baja Designs with the fogs wired into the factory fog light switch. I live in Alaska and drive some dark roads in the winter and I’ve been pretty pleased with my setup.

View attachment 204522
View attachment 204523
View attachment 204524

I’m interested in this setup. Any problems with the installation? Plug and play?

 

[Gremlin4x]

I’m interested in this setup. Any problems with the installation? Plug and play?

Very plug and play. The mounts in the fog light pockets are from Baja Designs and bolt right up. I plugged the ambers to the factory fog light wiring with aid of resistors. The clear fog light and a-pillar light are wired through an sPod. I have had zero issues with them.

 

[Scotts26]

These bad boys showed up today. Got the A pillar mounts installed and test fit the lights. Pretty slick. Waiting on the S8 light bar and switch pod to finish the install.

 

[Trailmaker]

These bad boys showed up today. Got the A pillar mounts installed and test fit the lights. Pretty slick. Waiting on the S8 light bar and switch pod to finish the install.

View attachment 205886

View attachment 205887

View attachment 205888

I like that this mounts a little wider then the one I bought last year, Too bad that company doesn’t sell them in Black.

 

[Scotts26]

I like that this mounts a little wider then the one I bought last year, Too bad that company doesn’t sell them in Black.

The A pillar bracket that the bolts to the truck is black. The bracket that holds the light to the a pillar bracket is stainless. I’m considering painting the stainless but I’m undecided.

 

[MTRamFan]

Since electrical stuff is not my forte, I think I will go with this. Do not have to worry about going through the cab.
http://triggercontroller.com/product/trigger-4-plus-controller/

 

[56PW17]

Since electrical stuff is not my forte, I think I will go with this. Do not have to worry about going through the cab.
http://triggercontroller.com/product/trigger-4-plus-controller/

wow thats neat. thanks for sharing

 

[Scotts26]

Since electrical stuff is not my forte, I think I will go with this. Do not have to worry about going through the cab.
http://triggercontroller.com/product/trigger-4-plus-controller/

I almost pulled the “trigger” on the trigger 4 since the wireless aspect is pretty cool but it was out of stock everywhere even at the manufacturer when I was ordering.

They have a trigger 6 switch system also but the pricing on that and the S-Pod type systems is too rich for my blood personally. I ended up ordering the Rough Country MLC-6 controller. It should do what I need it too.

 

[Trailmaker]

I almost pulled the “trigger” on the trigger 4 since the wireless aspect is pretty cool but it was out of stock everywhere even at the manufacturer when I was ordering.

They have a trigger 6 switch system also but the pricing on that and the S-Pod type systems is too rich for my blood personally. I ended ordering the Rough Country MLC-6 controller. It should do what I need it too.

Does the job.

 

[Scotts26]

Does the job.

View attachment 206437

Good to hear you’re happy with it!