Zachohs
Senior Member
- Joined
- Jan 6, 2012
- Posts
- 222
- Reaction score
- 4
- Location
- Archer City, TX
- Ram Year
- 2014
- Engine
- Hemi 5.7
Okay, I turned off my truck when I went in for a piano lesson, came back about an hour later, turned on the truck and the dang amp wouldn't power on. Checked connections, except for the ground, then put a volt meter up and the main power wire is only delivering 7v to the amp. and the remote wire is at 13v. So what would cause the wire to not deliver enough voltage?
**I use an agu glass fuse, and 4 gauge knuconceptz wiring kit, with a kenwood 9105d amplifier, with the 10" kicker cvt subs, wired in parallel for a load of 2 ohms
**I use an agu glass fuse, and 4 gauge knuconceptz wiring kit, with a kenwood 9105d amplifier, with the 10" kicker cvt subs, wired in parallel for a load of 2 ohms
