Wheels are on!!!!

[Sdreeser]

Ok just put new wheels and tires on the pw. 100 percent better look and ride!!! Now it looks like a truck and not a roller skate with those rinky dinky stock wheels and tires. I have no rubbing at all with the 35 inch tires and they look so much better.

 

[BiGMERF]

congrats.. looks great...

 

[Sdreeser]

Thanks, I'm liking it more and more now. Those stock tires just dont do the truck justice. I think a truck that size should come from factory with 35s

 

[Hawkman]

That does look better. Sweet PW.

 

[WilliamS]

Those look great, pop them off mail them to me. My PW goes in wednesday for a level and 37's

 

[RamFarmer]

Those look great, pop them off mail them to me. My PW goes in wednesday for a level and 37's

All you are doing is leveling it out for now? If that works I know what size tire Ill be getting next time is

 

[WilliamS]

All you are doing is leveling it out for now? If that works I know what size tire Ill be getting next time is

Will do. I’ll be using the factory 17, might need a few mm spacer but it’ll get under there. I tried a 37 on my leveled 1500 and fit but was super close so reverse or angle approach would scrub so the power wagon will fit a 37x12.5 and clear all over the place.

 

[Sdreeser]

Those look great, pop them off mail them to me. My PW goes in wednesday for a level and 37's

Lol awesome man, I would love to do 37s maybe after I wear these 35s down

 

[RamFarmer]

Will do. I’ll be using the factory 17, might need a few mm spacer but it’ll get under there. I tried a 37 on my leveled 1500 and fit but was super close so reverse or angle approach would scrub so the power wagon will fit a 37x12.5 and clear all over the place.

Please upload pics because that will be nice to see. I am thinking of putting a level on mine anyway and then i will have lots of clearance even though the 35s don't have any problems.

 

[WilliamS]

Please upload pics because that will be nice to see. I am thinking of putting a level on mine anyway and then i will have lots of clearance even though the 35s don't have any problems.

37s only need 1 more inch of clearance over 35’s remember it’s radius not diameter.


Sent from my iPhone using Tapatalk

 

[MADDOG]

Looks good! It also looks right.

What did you use to level your front?

 

[Demon-HeMi]

what are your wheel and tire specs?

 

[Sdreeser]

I have no leveling kit. That is all stock suspension and tires fit fine no issues. The wheels are 18x9 plus 18 offset by method nv. Tires are 35x12.50 toyo open country mt

 

[MADDOG]

Must be the angle. It looked leveled to me.

 

[Sdreeser]

Yea its sitting on a slight slope, but it does look level when u glance at it even on flat road. That is way I haven't really looked into a leveling kit, I dont think it will be that much of a difference for the cost. All leveling kits I have looked at are in the $1000 plus range that's crazy for a inch to inch and half lift. I got an additional 1 inch of lift just from installing the 35 inch tires

 

[Snyder]

Ok just put new wheels and tires on the pw. 100 percent better look and ride!!! Now it looks like a truck and not a roller skate with those rinky dinky stock wheels and tires. I have no rubbing at all with the 35 inch tires and they look so much better. View attachment 126961

View attachment 126962

View attachment 126963

View attachment 126964

Looks great thanks for the side view!

 

[miguelherrera4]

Sweet!

Sent from my SM-N950U using Tapatalk

 

[continuecrushing]

looking great! Definitely agree-35's should have come on the truck!

 

[darren Toth]

If you want a cheap way to level your truck you can go with a 2 1/2" lift strut spacer for around 60 bucks ( that's what I did) or get a set of Bilsteins that can be adjusted upto 2 3/4"

 

[Sdreeser]

If you want a cheap way to level your truck you can go with a 2 1/2" lift strut spacer for around 60 bucks ( that's what I did) or get a set of Bilsteins that can be adjusted upto 2 3/4"

Cool, thanks. Which spacers did u go with? Every kit I have looked at says it is not compatible with pw