2016 2500 2in level with 35s

blackram2014 · Feb 26, 2017

I'm looking at running the stock steel 18in wheels. I've done a lot of reading and some say it rubs some say is doesn't. I'd like to know who here actually runs this setup and there results, thanks

Dmopar74 · Feb 26, 2017

I run 305/70/18 on stock wheels with 2.5 and get a little rub at full lock on inclines

blackram2014 · Feb 26, 2017

Rub on the fender or on the radius arms?

Dmopar74 · Feb 26, 2017

Radius arms

theviking · Feb 26, 2017

I run 35's on the stock 20's with a 1.5" level and nothing rubs. I doubt there is much different in offset between the factory 18's and 20's.

blackram2014 · Feb 27, 2017

Ok as long as it's only on the radius arms I'm ok with that I just don't want any fender contact.

Rampant · Feb 28, 2017

I run 35x12.5s on stock 20s with no level. I get minimal radius arm rub at full lock. I'm pretty sure you could run 37s without worrying about hitting the fenders.

BIGWHITE16 · Mar 10, 2017

20x9, 35x12.5 TOYO AT, pro comp level spacer kit - provides just about the same diameter (a little taller) than stock rim/tire combo. At full lock out, it will hit a little tiny bit at the plastic inside fender corner edge. Snip a little off, and there's no rub. Minimal radius arm rub as well.

blackram2014 · Mar 10, 2017

Thanks guys, I got my 305/70/r18 mastercraft cxt's installed last night, no rubbing even with the plow on now I just need to go to the dealer and try and get my tires pressure threshold lowered.

SETEX 6.4 · Mar 10, 2017

blackram2014 said:
Thanks guys, I got my 305/70/r18 mastercraft cxt's installed last night, no rubbing even with the plow on now I just need to go to the dealer and try and get my tires pressure threshold lowered.

Good luck with that. Nobody local to me will touch it anymore. Say they are not allowed to do it.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Dmopar74 · Mar 10, 2017

Took my level kit off yesterday and my 305/70/18s still only min rub on radius arms

Will Ram 2500 · Mar 10, 2017

Dmopar74 said:
Took my level kit off yesterday and my 305/70/18s still only min rub on radius arms

Why did you take it off? These trucks look amazing leveled out.

Dmopar74 · Mar 11, 2017

Will Ram 2500 said:
Why did you take it off? These trucks look amazing leveled out.

Yes they do but I haul an inbed camper and tow a boat, transfers too much weight off the front with the front lifted.

blackram2014 · Mar 11, 2017

I'm gonna throw air bags on mine for when I have a skid of salt in the bed.

Will Ram 2500 · Mar 11, 2017

Dmopar74 said:
Yes they do but I haul an inbed camper and tow a boat, transfers too much weight off the front with the front lifted.

It does make them light up front leveled with a heavy load for sure.

2016 2500 2in level with 35s

blackram2014

Junior Member

Dmopar74

Senior Member

blackram2014

Junior Member

Dmopar74

Senior Member

theviking

Senior Member

blackram2014

Junior Member

Rampant

Senior Member

BIGWHITE16

Member

blackram2014

Junior Member

SETEX 6.4

Senior Member

Dmopar74

Senior Member

Will Ram 2500

Senior Member

Dmopar74

Senior Member

blackram2014

Junior Member

Will Ram 2500

Senior Member

Similar threads

Latest posts

Members online

Forum statistics

Share this page