KMC Slide 24" 305/35-24 Nitto 420S - Question

DARKNHT · Nov 9, 2015

I am looking at getting this setup. I have a 2014 Express CrewCab 4WD. Stock ride height do I need to worry about rubbing lock to lock? Possibly in the future will do the Ground Force 2/3 drop next spring/summer or would I be better going with the 22" combo?

DARKNHT · Nov 9, 2015

It's a 4WD, but I am no intention of using it off-road. Only have it for if I need it in the winter.

Milt IV · Nov 10, 2015

I run a 24x10 with 305/35r24 with a + 25.4 offset on a 2015 CC with 2/3 ground force drop at 2/3.75 and have zero rubbing issues. Mine is a 4x4 as well. I don't know what the offset is on the slides but you might want to check that out first.

DARKNHT · Dec 2, 2015

Milt IV said:
I run a 24x10 with 305/35r24 with a + 25.4 offset on a 2015 CC with 2/3 ground force drop at 2/3.75 and have zero rubbing issues. Mine is a 4x4 as well. I don't know what the offset is on the slides but you might want to check that out first.

Thanks for the input!

I really want your setup, I read your thread last night briefly on your drop. Trying to debate to go that route or HipnotikRCR's route. I don't wanna give up too much comfort and have it ride rough, but I would like to stiffen slightly to eliminate some body roll...

KMC Slide 24" 305/35-24 Nitto 420S - Question

DARKNHT

Senior Member

DARKNHT

Senior Member

Milt IV

Senior Member

DARKNHT

Senior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page