Bora adapters

[15RamTX]

I have a couple questions on my 1.25" adapters
With my studs being 1.5" do yall think I will have to trim with .25in existing stud sticking out and the new studs on the boras are 1.25" so they are .25" shorter then the existing studs will those be long enough?

Thanks

 

[xrsman]

You'll need to trim the studs

Sent from my SM-G920W8 using Tapatalk

 

[15RamTX]

I was worried about that but wasn't for sure with it only being a .25"
I'll just get rid of them and get the 1.5" or 2" adapters

 

[brandonjansen]

Are you using them with stock wheels or aftermarket? Most stock wheels have indents between the lug holes that will allow the excess 0.25" to protrude into and it will work no problem. Aftermarket wheels do not typically have those indents.

 

[15RamTX]

I'm using the stock wheels I noticed the indents I just figured I would ask on here before I did it lol

 

[15RamTX]

Will the studs on the adapters being a .25" shorter affect anything

 

[R.L.K.]

You will have plenty of thred engagement .